Departmental Advisors
Undergraduate Studies Office
Debra Mascaro
MEB 2220
Graduate Studies Office
Erik Pardyjak
MEB 2110 - (801)585-6414
Departmental Notes

For course descriptions and pre-requisite information click on the subject column next to the appropriate catalog number.

THIS DEPARTMENT ENFORCES UNDERGRADUATE PREREQUISITES. Please note that the registration system does not factor in transfer work when determining if prerequisites have been met. If you are unable to register for a course and think you have met the prerequisite(s), please contact an advisor from this department to inquire about obtaining a permission code. You may be administratively dropped from a course if the prerequisite has not been met.

ME EN 1005 - 001 CAD Lab

ME EN 1005 - 001 CAD Lab

  • Class Number: 13242
  • Instructor: JOHNSON, AVERY
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 3

ME EN 1010 - 001 Intro Robot Sys Des II


This course requires enrollment in a corresponding lab section. Sections 2-8 are associated with this lecture section. If necessary, the ME EN 1010 enrollment cap will be increased during the first week of the spring semester.

ME EN 1010 - 001 Intro Robot Sys Des II


This course requires enrollment in a corresponding lab section. Sections 2-8 are associated with this lecture section. If necessary, the ME EN 1010 enrollment cap will be increased during the first week of the spring semester.

ME EN 1010 - 002 Intro Robot Sys Des II

ME EN 1010 - 002 Intro Robot Sys Des II

ME EN 1010 - 003 Intro Robot Sys Des II

ME EN 1010 - 003 Intro Robot Sys Des II

ME EN 1010 - 004 Intro Robot Sys Des II

ME EN 1010 - 004 Intro Robot Sys Des II

ME EN 1010 - 005 Intro Robot Sys Des II

ME EN 1010 - 005 Intro Robot Sys Des II

ME EN 1010 - 006 Intro Robot Sys Des II

ME EN 1010 - 006 Intro Robot Sys Des II

ME EN 1010 - 007 Intro Robot Sys Des II

ME EN 1010 - 007 Intro Robot Sys Des II

ME EN 1010 - 008 Intro Robot Sys Des II

ME EN 1010 - 008 Intro Robot Sys Des II

ME EN 1300 - 001 Statics/Strength

ME EN 1300 - 001 Statics/Strength

  • Class Number: 1129
  • Instructor: COATS, BRITTANY
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 19

ME EN 2020 - 001 Particle Dynamics


This class meets with ME EN 2080-001 in WEB 2250.

ME EN 2020 - 001 Particle Dynamics

  • Class Number: 1884
  • Instructor: DEVRIES, LARRY
  • Component: Lecture
  • Type: In Person
  • Units: 2.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 4

This class meets with ME EN 2080-001 in WEB 2250.

ME EN 2080 - 001 Dynamics


This class meets with ME EN 2020-001.

ME EN 2080 - 001 Dynamics

  • Class Number: 1130
  • Instructor: DEVRIES, LARRY
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 0

This class meets with ME EN 2020-001.

ME EN 2510 - 001 Intro Energy Sys Des II


This course requires enrollment in a corresponding lab section. Sections 2-7 are associated with this lecture section.

ME EN 2510 - 001 Intro Energy Sys Des II

  • Class Number: 13981
  • Instructor: ROEMER, ROBERT
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 13

This course requires enrollment in a corresponding lab section. Sections 2-7 are associated with this lecture section.

ME EN 2510 - 002 Intro Energy Sys Des II

ME EN 2510 - 002 Intro Energy Sys Des II

  • Class Number:
  • Instructor: ROEMER, ROBERT
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 0

ME EN 2510 - 004 Intro Energy Sys Des II

ME EN 2510 - 004 Intro Energy Sys Des II

  • Class Number:
  • Instructor: ROEMER, ROBERT
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 3

ME EN 2510 - 006 Intro Energy Sys Des II

ME EN 2510 - 006 Intro Energy Sys Des II

  • Class Number:
  • Instructor: ROEMER, ROBERT
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

ME EN 2510 - 007 Intro Energy Sys Des II

ME EN 2510 - 007 Intro Energy Sys Des II

  • Class Number:
  • Instructor: ROEMER, ROBERT
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 9

ME EN 2655 - 002 Manufacturing Lab

ME EN 2655 - 002 Manufacturing Lab

  • Class Number: 10376
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 0

ME EN 2655 - 003 Manufacturing Lab

ME EN 2655 - 003 Manufacturing Lab

  • Class Number: 13936
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 0

ME EN 2655 - 004 Manufacturing Lab

ME EN 2655 - 004 Manufacturing Lab

  • Class Number: 10377
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 0

ME EN 2655 - 005 Manufacturing Lab

ME EN 2655 - 005 Manufacturing Lab

  • Class Number: 10378
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 4

ME EN 2655 - 006 Manufacturing Lab

ME EN 2655 - 006 Manufacturing Lab

  • Class Number: 10379
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 0

ME EN 2660 - 001 Machining Laboratory

ME EN 2660 - 001 Machining Laboratory

  • Class Number: 16516
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 0.5
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 3

ME EN 2660 - 002 Machining Laboratory

ME EN 2660 - 002 Machining Laboratory

  • Class Number: 16517
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 0.5
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 6

ME EN 2660 - 003 Machining Laboratory

ME EN 2660 - 003 Machining Laboratory

  • Class Number: 16518
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 0.5
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 1

ME EN 2950 - 001 Indep Study


Each faculty member is assigned a unique section of ME EN 2950. Complete a Course Participation Request form (available in MEB 2220) and return it to ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 2950 - 001 Indep Study

  • Class Number: 16520
  • Instructor: AMEEL, TIM
  • Component: Independent Study
  • Type: In Person
  • Units: 1.0 - 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 2950. Complete a Course Participation Request form (available in MEB 2220) and return it to ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 2960 - 001 Found. Microsystems


This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place. The course description can be found here: http://www.acs.utah.edu/GenCatalog/1118/crsdesc/me_en.html#2960. Alternate meeting times may be scheduled pending sufficient student interest.

ME EN 2960 - 001 Found. Microsystems

  • Class Number: 17005
  • Instructor: HOGAN, ALEXANDER
  • Component: Special Topics
  • Type: In Person
  • Units: 1.0
  • Wait List: No
  • Fees: $72.00
  • Seats Available: 7

This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place. The course description can be found here: http://www.acs.utah.edu/GenCatalog/1118/crsdesc/me_en.html#2960. Alternate meeting times may be scheduled pending sufficient student interest.

ME EN 3000 - 001 Design of Mech Elements

ME EN 3000 - 001 Design of Mech Elements

  • Class Number: 17067
  • Instructor: RAEYMAEKERS, BART
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $5.00
  • Seats Available: 17

ME EN 3210 - 001 Mechatronics II


This course requires enrollment in a corresponding lab section. Sections 2-13 are associated with this lecture section.

ME EN 3210 - 001 Mechatronics II

  • Class Number: 2820
  • Instructor: MEEK, SANFORD
  • Instructor: MINOR, MARK ANDREW
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 23

This course requires enrollment in a corresponding lab section. Sections 2-13 are associated with this lecture section.

ME EN 3210 - 002 Mechatronics II

ME EN 3210 - 002 Mechatronics II

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Instructor: MINOR, MARK ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: -1

ME EN 3210 - 003 Mechatronics II

ME EN 3210 - 003 Mechatronics II

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Instructor: MINOR, MARK ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 0

ME EN 3210 - 004 Mechatronics II

ME EN 3210 - 004 Mechatronics II

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Instructor: MINOR, MARK ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 0

ME EN 3210 - 005 Mechatronics II

ME EN 3210 - 005 Mechatronics II

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Instructor: MINOR, MARK ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 0

ME EN 3210 - 006 Mechatronics II

ME EN 3210 - 006 Mechatronics II

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Instructor: MINOR, MARK ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: -2

ME EN 3210 - 007 Mechatronics II

ME EN 3210 - 007 Mechatronics II

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Instructor: MINOR, MARK ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 0

ME EN 3210 - 008 Mechatronics II

ME EN 3210 - 008 Mechatronics II

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Instructor: MINOR, MARK ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 0

ME EN 3210 - 009 Mechatronics II

ME EN 3210 - 009 Mechatronics II

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Instructor: MINOR, MARK ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 0

ME EN 3210 - 010 Mechatronics II

ME EN 3210 - 010 Mechatronics II

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Instructor: MINOR, MARK ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 2

ME EN 3210 - 012 Mechatronics II

ME EN 3210 - 012 Mechatronics II

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Instructor: MINOR, MARK ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 0

ME EN 3300 - 001 Strength Of Materials


This course requires enrollment in a corresponding lab section. Sections 2-6 are associated with this lecture section.

ME EN 3300 - 001 Strength Of Materials

  • Class Number: 1131
  • Instructor: DEVRIES, LARRY
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 18

This course requires enrollment in a corresponding lab section. Sections 2-6 are associated with this lecture section.

ME EN 3300 - 002 Strength Of Materials

ME EN 3300 - 002 Strength Of Materials

  • Class Number:
  • Instructor: DEVRIES, LARRY
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: -1

ME EN 3300 - 003 Strength Of Materials

ME EN 3300 - 003 Strength Of Materials

  • Class Number:
  • Instructor: DEVRIES, LARRY
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 1

ME EN 3300 - 004 Strength Of Materials

ME EN 3300 - 004 Strength Of Materials

  • Class Number:
  • Instructor: DEVRIES, LARRY
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: -1

ME EN 3300 - 005 Strength Of Materials

ME EN 3300 - 005 Strength Of Materials

  • Class Number:
  • Instructor: DEVRIES, LARRY
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 2

ME EN 3300 - 006 Strength Of Materials

ME EN 3300 - 006 Strength Of Materials

  • Class Number:
  • Instructor: DEVRIES, LARRY
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: -1

ME EN 3650 - 001 Heat Transfer


This course requires enrollment in a corresponding lab section. Sections 2-12 are associated with this lecture section.

ME EN 3650 - 001 Heat Transfer

  • Class Number: 1132
  • Instructor: FRANCOEUR, MATHIEU
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 41

This course requires enrollment in a corresponding lab section. Sections 2-12 are associated with this lecture section.

ME EN 3650 - 002 Heat Transfer

ME EN 3650 - 002 Heat Transfer

  • Class Number:
  • Instructor: FRANCOEUR, MATHIEU
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 1

ME EN 3650 - 003 Heat Transfer

ME EN 3650 - 003 Heat Transfer

  • Class Number:
  • Instructor: FRANCOEUR, MATHIEU
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 0

ME EN 3650 - 004 Heat Transfer

ME EN 3650 - 004 Heat Transfer

  • Class Number:
  • Instructor: FRANCOEUR, MATHIEU
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 1

ME EN 3650 - 005 Heat Transfer

ME EN 3650 - 005 Heat Transfer

  • Class Number:
  • Instructor: FRANCOEUR, MATHIEU
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 3

ME EN 3650 - 007 Heat Transfer

ME EN 3650 - 007 Heat Transfer

  • Class Number:
  • Instructor: FRANCOEUR, MATHIEU
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: -1

ME EN 3650 - 008 Heat Transfer

ME EN 3650 - 008 Heat Transfer

  • Class Number:
  • Instructor: FRANCOEUR, MATHIEU
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 0

ME EN 3650 - 009 Heat Transfer

ME EN 3650 - 009 Heat Transfer

  • Class Number:
  • Instructor: FRANCOEUR, MATHIEU
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 6

ME EN 3650 - 010 Heat Transfer

ME EN 3650 - 010 Heat Transfer

  • Class Number:
  • Instructor: FRANCOEUR, MATHIEU
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 6

ME EN 3650 - 011 Heat Transfer

ME EN 3650 - 011 Heat Transfer

  • Class Number:
  • Instructor: FRANCOEUR, MATHIEU
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 0

ME EN 3950 - 001 Indep Study


Each faculty member is assigned a unique section of ME EN 3950. Complete a Course Participatio Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 3950 - 001 Indep Study

  • Class Number: 16525
  • Instructor: AMEEL, TIM
  • Component: Independent Study
  • Type: In Person
  • Units: 1.0 - 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 3950. Complete a Course Participatio Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 4010 - 001 Engineering Design II

ME EN 4010 - 001 Engineering Design II

  • Class Number: 2829
  • Instructor: GALE, BRUCE
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $81.00
  • Seats Available: 18

ME EN 4050 - 001 Concurrent Eng. II

ME EN 4050 - 001 Concurrent Eng. II

  • Class Number: 2834
  • Instructor: CLARK, PAUL
  • Component: Lecture
  • Type: In Person
  • Units: 2.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 26

ME EN 4999 - 001 Honors Thesis/Project

ME EN 4999 - 001 Honors Thesis/Project

  • Class Number: 1594
  • Instructor: CHEN, KUAN
  • Component: Honors Thesis Project
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 10

ME EN 5040 - 001 Quality Assurance

ME EN 5040 - 001 Quality Assurance

  • Class Number: 16439
  • Instructor: BLINN, MICHAEL P
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 4

ME EN 5050 - 001 Micromachining

ME EN 5050 - 001 Micromachining

  • Class Number: 5287
  • Instructor: SANT, HIMANSHU
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $126.00
  • Seats Available: 17

ME EN 5060 - 001 Sustain Product/Process

ME EN 5060 - 001 Sustain Product/Process

  • Class Number: 14645
  • Instructor: BALAJI, A.K.
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 18

ME EN 5110 - 001 Industrial Safety

ME EN 5110 - 001 Industrial Safety

  • Class Number: 16479
  • Instructor: BLOSWICK, DONALD
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 13

ME EN 5210 - 001 State Space Control

ME EN 5210 - 001 State Space Control

  • Class Number: 5697
  • Instructor: ABBOTT, JAKE
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 9

ME EN 5230 - 001 Intro to Robot Control

ME EN 5230 - 001 Intro to Robot Control

  • Class Number: 13949
  • Instructor: MASCARO, STEPHEN A
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 17

ME EN 5410 - 001 Intrm. Dynamics

ME EN 5410 - 001 Intrm. Dynamics

  • Class Number: 16477
  • Instructor: MONSON, Ken
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 3

ME EN 5520 - 001 Composite Mat'ls

ME EN 5520 - 001 Composite Mat'ls

  • Class Number: 2831
  • Instructor: ADAMS, DANIEL
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 51

ME EN 5710 - 001 Aerodynamics

ME EN 5710 - 001 Aerodynamics

  • Class Number: 16440
  • Instructor: CHEN, KUAN
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 39

ME EN 5820 - 001 HVAC

  • Class Number: 13987
  • Instructor: GWILLIAM, SCOTT
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 37

Enrollment in this course requires the approval of Dr. Mascaro (dmascaro@mech.utah.edu).

ME EN 5910 - 079 Co-Op

  • Class Number: 1429
  • Instructor: MASCARO, DEBRA J
  • Component: Clinical
  • Type: In Person
  • Units: 1.0 - 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Enrollment in this course requires the approval of Dr. Mascaro (dmascaro@mech.utah.edu).

ME EN 5920 - 001 Design Project


Each faculty member is assigned a unique section of ME EN 5920. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5920 - 001 Design Project

  • Class Number: 3647
  • Instructor: AMEEL, TIM
  • Component: Special Projects
  • Type: In Person
  • Units: 1.0 - 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 5920. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5930 - 001 Undergrad Thesis


Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5930 - 001 Undergrad Thesis

  • Class Number: 1598
  • Instructor: AMEEL, TIM
  • Component: Independent Study
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5950 - 001 Indep Study


Each faculty member is assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5950 - 001 Indep Study

  • Class Number: 3520
  • Instructor: AMEEL, TIM
  • Component: Independent Study
  • Type: In Person
  • Units: 1.0 - 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5960 - 004 Advanced Manufacturing


Please contact the instructor to be placed on the registration list.

ME EN 5960 - 004 Advanced Manufacturing

  • Class Number: 8717
  • Instructor: SLOWIK, TOM S
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 2

Please contact the instructor to be placed on the registration list.

ME EN 5960 - 005 Advanced Manufacturing


Please contact the instructor to be placed on the registration list.

ME EN 5960 - 005 Advanced Manufacturing

  • Class Number: 11741
  • Instructor: SLOWIK, TOM S
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 3

Please contact the instructor to be placed on the registration list.

ME EN 6040 - 001 Quality Assurance

ME EN 6040 - 001 Quality Assurance

  • Class Number: 16442
  • Instructor: BLINN, MICHAEL P
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 3

ME EN 6050 - 001 Micromachining

ME EN 6050 - 001 Micromachining

  • Class Number: 5288
  • Instructor: SANT, HIMANSHU
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Wait List: No
  • Fees: $126.00
  • Seats Available: 3

ME EN 6060 - 001 Sustain Product/Process

ME EN 6060 - 001 Sustain Product/Process

  • Class Number: 14646
  • Instructor: BALAJI, A.K.
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 8

ME EN 6110 - 001 Industrial Safety

ME EN 6110 - 001 Industrial Safety

  • Class Number: 16480
  • Instructor: BLOSWICK, DONALD
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 3

ME EN 6140 - 001 Occupat Health & Safety


This class meets in the Rocky Mountain Center Occupational Health.

ME EN 6140 - 001 Occupat Health & Safety

  • Class Number: 14652
  • Instructor: MERRYWEATHER, ANDREW
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

This class meets in the Rocky Mountain Center Occupational Health.

ME EN 6210 - 001 State Space Control

ME EN 6210 - 001 State Space Control

  • Class Number: 5698
  • Instructor: ABBOTT, JAKE
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 3

ME EN 6230 - 001 Intro to Robot Control

ME EN 6230 - 001 Intro to Robot Control

  • Class Number: 13950
  • Instructor: MASCARO, STEPHEN A
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 6

ME EN 6410 - 001 Intermediate Dynamics

ME EN 6410 - 001 Intermediate Dynamics

  • Class Number: 16478
  • Instructor: MONSON, Ken
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 15

ME EN 6520 - 001 Composite Mat'ls

ME EN 6520 - 001 Composite Mat'ls

  • Class Number: 2833
  • Instructor: ADAMS, DANIEL
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 18

ME EN 6710 - 001 Aerodynamics

ME EN 6710 - 001 Aerodynamics

  • Class Number: 16441
  • Instructor: CHEN, KUAN
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 8

ME EN 6720 - 001 Comp Fluid Dynamics

ME EN 6720 - 001 Comp Fluid Dynamics

  • Class Number: 16472
  • Instructor: STOLL, Rob
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 14

ME EN 6820 - 001 HVAC

  • Class Number: 13988
  • Instructor: GWILLIAM, SCOTT
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 13

ME EN 6950 - 001 Indep Study


Each faculty member is assigned a unique section of ME EN 6950. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 6950 - 001 Indep Study

  • Class Number: 1599
  • Instructor: AMEEL, TIM
  • Component: Independent Study
  • Type: In Person
  • Units: 1.0 - 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 6950. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 6955 - 001 Special Project


Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 6955 - 001 Special Project

  • Class Number: 1600
  • Instructor: AMEEL, TIM
  • Component: Special Projects
  • Type: In Person
  • Units: 1.0 - 4.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 6960 - 004 Advanced Manufacturing

ME EN 6960 - 004 Advanced Manufacturing

  • Class Number: 12445
  • Instructor: SLOWIK, TOM S
  • Component: Lecture
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 4

ME EN 6960 - 005 Advanced Manufacturing

ME EN 6960 - 005 Advanced Manufacturing

  • Class Number: 12446
  • Instructor: SLOWIK, TOM S
  • Component: Lecture
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 2

ME EN 6960 - 006 Heterogeneous Microsystems Tec


Project-based course in microsystems: Students choose either a microfab-based design/build project, or design MEMS devices for submission to Sandia University Alliance competition. Art students welcome to collaborate designing Kinetic Micro Sculpture.

ME EN 6960 - 006 Heterogeneous Microsystems Tec

  • Class Number: 8768
  • Instructor: HARVEY, IAN
  • Component: Lecture
  • Type: In Person
  • Units: 1.0 - 4.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 5

Project-based course in microsystems: Students choose either a microfab-based design/build project, or design MEMS devices for submission to Sandia University Alliance competition. Art students welcome to collaborate designing Kinetic Micro Sculpture.

ME EN 6960 - 007 Environmental Instrumentation


This class also meets with ATMOS 5050-001 for the first half of the semester.

ME EN 6960 - 007 Environmental Instrumentation

  • Class Number: 12610
  • Instructor: HOREL, JOHN
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 5

This class also meets with ATMOS 5050-001 for the first half of the semester.

ME EN 6960 - 008 Micro Acuators


Students taking this class must enroll in one of these lab sections as well: ME EN 6960-009, ME EN 6960-010. ME EN 6960-011 or ME EN 6960-012.

ME EN 6960 - 008 Micro Acuators

  • Class Number: 12609
  • Instructor: KIM, HANSEUP
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 4

Students taking this class must enroll in one of these lab sections as well: ME EN 6960-009, ME EN 6960-010. ME EN 6960-011 or ME EN 6960-012.

ME EN 6960 - 009 Micro Acuators


Students registering for this class must also register for ME EN 6960-008 or ME EN 7960-005.

ME EN 6960 - 009 Micro Acuators

  • Class Number: 12611
  • Instructor: KIM, HANSEUP
  • Instructor: KIM, HYUNTAE
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 4

Students registering for this class must also register for ME EN 6960-008 or ME EN 7960-005.

ME EN 6960 - 010 Micro Acuators


Students registering for this class must also register for ME EN 6960-008 or ME EN 7960-005.

ME EN 6960 - 010 Micro Acuators

  • Class Number: 5710
  • Instructor: KIM, HANSEUP
  • Instructor: KIM, HYUNTAE
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 2

Students registering for this class must also register for ME EN 6960-008 or ME EN 7960-005.

ME EN 6960 - 011 Micro Acuators


Students registering for this class must also register for ME EN 6960-008 or ME EN 7960-005.

ME EN 6960 - 011 Micro Acuators

  • Class Number: 15663
  • Instructor: KIM, HANSEUP
  • Instructor: KIM, HYUNTAE
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 0

Students registering for this class must also register for ME EN 6960-008 or ME EN 7960-005.

ME EN 6960 - 012 Micro Acuators


Students registering for this class must also register for ME EN 6960-008 or ME EN 7960-005.

ME EN 6960 - 012 Micro Acuators

  • Class Number: 15664
  • Instructor: KIM, HANSEUP
  • Instructor: KIM, HYUNTAE
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 2

Students registering for this class must also register for ME EN 6960-008 or ME EN 7960-005.

ME EN 6960 - 013 Systems Eng. II

ME EN 6960 - 013 Systems Eng. II

  • Class Number: 11738
  • Instructor: GOLDBERG, BENJAMIN E
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 7

ME EN 6960 - 014 Manufacturing Practices

ME EN 6960 - 014 Manufacturing Practices

  • Class Number: 15863
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 3

ME EN 6960 - 015 Manufacturing Practices

ME EN 6960 - 015 Manufacturing Practices

  • Class Number: 17120
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: -1

ME EN 6960 - 016 Manufacturing Practices

ME EN 6960 - 016 Manufacturing Practices

  • Class Number: 17122
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 0

ME EN 6975 - 001 Masters Thesis


Each faculty member is assigned a unique section of ME EN 6975. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 6975 - 001 Masters Thesis

  • Class Number: 1601
  • Instructor: AMEEL, TIM
  • Component: Thesis Research
  • Type: In Person
  • Units: 1.0 - 12.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 6975. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 6980 - 001 Fac Consult, MS


Each faculty member is assigned a unique section of ME EN 6980. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 6980 - 001 Fac Consult, MS

  • Class Number: 1602
  • Instructor: AMEEL, TIM
  • Component: Independent Study
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 6980. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 7100 - 001 Adv Ergonomics

ME EN 7100 - 001 Adv Ergonomics

  • Class Number: 16473
  • Instructor: MERRYWEATHER, ANDREW
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 8

ME EN 7105 - 001 Adv Ergonomics Lab

ME EN 7105 - 001 Adv Ergonomics Lab

  • Class Number: 16474
  • Instructor: MERRYWEATHER, ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $75.00
  • Seats Available: 20
  • Class Number: 16475
  • Instructor: BRANNON, REBECCA M
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $25.00
  • Seats Available: 13

ME EN 7720 - 001 Turbulence

ME EN 7720 - 001 Turbulence

  • Class Number: 16476
  • Instructor: DILLON, M
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 16

ME EN 7960 - 002 Grad Fluids Seminar


This is a seminar class.

ME EN 7960 - 002 Grad Fluids Seminar

  • Class Number: 8328
  • Instructor: DILLON, M
  • Component: Special Topics
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 11

This is a seminar class.

ME EN 7960 - 003 Robotics Seminar

ME EN 7960 - 003 Robotics Seminar

  • Class Number: 11531
  • Instructor: JOHNSON, DAVID
  • Component: Special Topics
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 5

ME EN 7960 - 005 Micro Acuators


Students taking this class must enroll in one of these lab sections as well: ME EN 6960-009, ME EN 6960-010. ME EN 6960-011 or ME EN 6960-012.

ME EN 7960 - 005 Micro Acuators

  • Class Number: 10366
  • Instructor: KIM, HANSEUP
  • Component: Lecture
  • Type: In Person
  • Units: 1.0 - 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 2

Students taking this class must enroll in one of these lab sections as well: ME EN 6960-009, ME EN 6960-010. ME EN 6960-011 or ME EN 6960-012.

ME EN 7970 - 001 PhD Dissertation


Each faculty member is assigned a unique section of ME EN 7970. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 7970 - 001 PhD Dissertation

  • Class Number: 1603
  • Instructor: AMEEL, TIM
  • Component: Thesis Research
  • Type: In Person
  • Units: 1.0 - 12.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 7970. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 7970 - 047 PhD Dissertation

ME EN 7970 - 047 PhD Dissertation

  • Class Number: 18168
  • Instructor: VAN DEN BERG, JUR
  • Component: Thesis Research
  • Type: In Person
  • Units: 1.0 - 12.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 5

ME EN 7980 - 001 Fac Consultation, PhD


Each faculty member is assigned a unique section of ME EN 7980. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 7980 - 001 Fac Consultation, PhD

  • Class Number: 1604
  • Instructor: AMEEL, TIM
  • Component: Independent Study
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 7980. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 7990 - 001 Cont Registration, PhD


Each faculty member is assigned a unique section of ME EN 7990. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 7990 - 001 Cont Registration, PhD

  • Class Number: 1605
  • Instructor: AMEEL, TIM
  • Component: Continuing Registration
  • Type: In Person
  • Units: 0.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 7990. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.