Departmental Advisors
Undergraduate Studies Office
Debra Mascaro
MEB 2220
Graduate Studies Office
Erik Pardyjak
MEB 2110 - (801)585-6414
Departmental Notes

For course descriptions and pre-requisite information click on the subject column next to the appropriate catalog number.

THIS DEPARTMENT ENFORCES UNDERGRADUATE PREREQUISITES. Please note that the registration system does not factor in transfer work when determining if prerequisites have been met. If you are unable to register for a course and think you have met the prerequisite(s), please contact an advisor from this department to inquire about obtaining a permission code. You may be administratively dropped from a course if the prerequisite has not been met.

ME EN 1000 - 001 Intro Robot Sys Design I


This course requires enrollment in a corresponding lab section. Sections 2-9 are associated with this lecture section. Students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. U of U Freshman Admits should apply here: http://tinyurl.com/UMEFrApp. U of U Transfer Admits should apply here: http://tinyurl.com/UMETrApp. Applications for Fall 2012 are due April 15, 2012. Students who submit applications after this date will be considered for admission only if space is available.

ME EN 1000 - 001 Intro Robot Sys Design I

  • Class Number: 1311
  • Instructor: MASCARO, DEBRA J
  • Instructor: MERRYWEATHER, ANDREW
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $105.00
  • Seats Available: -8

This course requires enrollment in a corresponding lab section. Sections 2-9 are associated with this lecture section. Students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. U of U Freshman Admits should apply here: http://tinyurl.com/UMEFrApp. U of U Transfer Admits should apply here: http://tinyurl.com/UMETrApp. Applications for Fall 2012 are due April 15, 2012. Students who submit applications after this date will be considered for admission only if space is available.

ME EN 1000 - 002 Intro Robot Sys Design I

ME EN 1000 - 002 Intro Robot Sys Design I

  • Class Number:
  • Instructor: MASCARO, DEBRA J
  • Instructor: MERRYWEATHER, ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $105.00
  • Seats Available: 0

ME EN 1000 - 003 Intro Robot Sys Design I

ME EN 1000 - 003 Intro Robot Sys Design I

  • Class Number:
  • Instructor: MASCARO, DEBRA J
  • Instructor: MERRYWEATHER, ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $105.00
  • Seats Available: -5

ME EN 1000 - 004 Intro Robot Sys Design I

ME EN 1000 - 004 Intro Robot Sys Design I

  • Class Number:
  • Instructor: MASCARO, DEBRA J
  • Instructor: MERRYWEATHER, ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $105.00
  • Seats Available: 0

ME EN 1000 - 005 Intro Robot Sys Design I

ME EN 1000 - 005 Intro Robot Sys Design I

  • Class Number:
  • Instructor: MASCARO, DEBRA J
  • Instructor: MERRYWEATHER, ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $105.00
  • Seats Available: -4

ME EN 1000 - 006 Intro Robot Sys Design I

ME EN 1000 - 006 Intro Robot Sys Design I

  • Class Number:
  • Instructor: MASCARO, DEBRA J
  • Instructor: MERRYWEATHER, ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $105.00
  • Seats Available: -1

ME EN 1000 - 007 Intro Robot Sys Design I

ME EN 1000 - 007 Intro Robot Sys Design I

  • Class Number:
  • Instructor: MASCARO, DEBRA J
  • Instructor: MERRYWEATHER, ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $105.00
  • Seats Available: -1

ME EN 1000 - 008 Intro Robot Sys Design I

ME EN 1000 - 008 Intro Robot Sys Design I

  • Class Number:
  • Instructor: MASCARO, DEBRA J
  • Instructor: MERRYWEATHER, ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $105.00
  • Seats Available: -4

ME EN 1000 - 009 Intro Robot Sys Design I

ME EN 1000 - 009 Intro Robot Sys Design I

  • Class Number:
  • Instructor: MASCARO, DEBRA J
  • Instructor: MERRYWEATHER, ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $105.00
  • Seats Available: 4

ME EN 1000 - 010 Intro Robot Sys Design I


If you are UNABLE to attend ANY of the ME EN 1000 lab sections that are currently open for enrollment, please enroll into this section. You will be moved to one of the other sections during the first week of class.

ME EN 1000 - 010 Intro Robot Sys Design I

  • Class Number:
  • Instructor: MASCARO, DEBRA J
  • Instructor: MERRYWEATHER, ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $105.00
  • Seats Available: 3

If you are UNABLE to attend ANY of the ME EN 1000 lab sections that are currently open for enrollment, please enroll into this section. You will be moved to one of the other sections during the first week of class.

ME EN 1005 - 001 CAD Lab

ME EN 1005 - 001 CAD Lab

  • Class Number: 6605
  • Instructor: SHORTI, RAMI M
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: -1
  • Class Number: 1312
  • Instructor: BRANNON, REBECCA M
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 27

ME EN 2020 - 001 Particle Dynamics


This class meets with ME EN 2080-001 in WEB 1230.

ME EN 2020 - 001 Particle Dynamics

  • Class Number: 2728
  • Instructor: MONSON, KEN L
  • Component: Lecture
  • Type: In Person
  • Units: 2.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 23

This class meets with ME EN 2080-001 in WEB 1230.

ME EN 2080 - 001 Dynamics


New transfer students must apply (http://tinyurl.com/UMETrApp) and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2012 are due April 15, 2012. Students who submit applications after this date will be considered for admission only if space is available.

ME EN 2080 - 001 Dynamics

  • Class Number: 1314
  • Instructor: MONSON, KEN L
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 54

New transfer students must apply (http://tinyurl.com/UMETrApp) and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2012 are due April 15, 2012. Students who submit applications after this date will be considered for admission only if space is available.

ME EN 2500 - 001 Intro Energy Sys Des I


This course requires enrollment in a corresponding lab section. Sections 2-7 are associated with this lecture section. If you are unable to enroll because the lab sections are full, please attend the first day of class and talk to the instructor to enroll. New transfer students must apply (http://tinyurl.com/UMETrApp) and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2012 are due April 15, 2012. Students who submit applications after this date will be considered for admission only if space is available.

ME EN 2500 - 001 Intro Energy Sys Des I

  • Class Number: 12945
  • Instructor: GALE, BRUCE
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $75.00
  • Seats Available: -1

This course requires enrollment in a corresponding lab section. Sections 2-7 are associated with this lecture section. If you are unable to enroll because the lab sections are full, please attend the first day of class and talk to the instructor to enroll. New transfer students must apply (http://tinyurl.com/UMETrApp) and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2012 are due April 15, 2012. Students who submit applications after this date will be considered for admission only if space is available.

ME EN 2500 - 002 Intro Energy Sys Des I

ME EN 2500 - 002 Intro Energy Sys Des I

  • Class Number:
  • Instructor: GALE, BRUCE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $75.00
  • Seats Available: -1

ME EN 2500 - 003 Intro Energy Sys Des I

ME EN 2500 - 003 Intro Energy Sys Des I

  • Class Number:
  • Instructor: GALE, BRUCE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $75.00
  • Seats Available: 2

ME EN 2500 - 004 Intro Energy Sys Des I

ME EN 2500 - 004 Intro Energy Sys Des I

  • Class Number:
  • Instructor: GALE, BRUCE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $75.00
  • Seats Available: -3

ME EN 2500 - 005 Intro Energy Sys Des I

ME EN 2500 - 005 Intro Energy Sys Des I

  • Class Number:
  • Instructor: GALE, BRUCE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $75.00
  • Seats Available: -1

ME EN 2500 - 006 Intro Energy Sys Des I

ME EN 2500 - 006 Intro Energy Sys Des I

  • Class Number:
  • Instructor: GALE, BRUCE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $75.00
  • Seats Available: -3

ME EN 2500 - 007 Intro Energy Sys Des I

ME EN 2500 - 007 Intro Energy Sys Des I

  • Class Number:
  • Instructor: GALE, BRUCE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $75.00
  • Seats Available: 5

ME EN 2655 - 002 Manufacturing Lab

ME EN 2655 - 002 Manufacturing Lab

  • Class Number: 10030
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 1

ME EN 2655 - 003 Manufacturing Lab

ME EN 2655 - 003 Manufacturing Lab

  • Class Number: 11752
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 3

ME EN 2655 - 004 Manufacturing Lab

ME EN 2655 - 004 Manufacturing Lab

  • Class Number: 11753
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 3

ME EN 2655 - 005 Manufacturing Lab

ME EN 2655 - 005 Manufacturing Lab

  • Class Number: 16126
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 2

ME EN 2655 - 006 Manufacturing Lab

ME EN 2655 - 006 Manufacturing Lab

  • Class Number: 10031
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 0

ME EN 2660 - 001 Machining Laboratory


To be eligible for this class, you must have completed both ME EN 1000 and ME EN 1010 at the University of Utah.

ME EN 2660 - 001 Machining Laboratory

  • Class Number: 15562
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 0.5
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 0

To be eligible for this class, you must have completed both ME EN 1000 and ME EN 1010 at the University of Utah.

ME EN 2660 - 002 Machining Laboratory


To be eligible for this class, you must have completed both ME EN 1000 and ME EN 1010 at the University of Utah.

ME EN 2660 - 002 Machining Laboratory

  • Class Number: 15563
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 0.5
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 1

To be eligible for this class, you must have completed both ME EN 1000 and ME EN 1010 at the University of Utah.

ME EN 2660 - 003 Machining Laboratory


To be eligible for this class, you must have completed both ME EN 1000 and ME EN 1010 at the University of Utah.

ME EN 2660 - 003 Machining Laboratory

  • Class Number: 15564
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 0.5
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 3

To be eligible for this class, you must have completed both ME EN 1000 and ME EN 1010 at the University of Utah.

ME EN 2960 - 001 Found. Microsystems


This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place. The course description can be found here: http://www.acs.utah.edu/GenCatalog/1118/crsdesc/me_en.html#2960

ME EN 2960 - 001 Found. Microsystems

  • Class Number: 15589
  • Instructor: HOGAN, ALEXANDER
  • Component: Special Topics
  • Type: In Person
  • Units: 1.0
  • Wait List: No
  • Fees: $72.00
  • Seats Available: -2

This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place. The course description can be found here: http://www.acs.utah.edu/GenCatalog/1118/crsdesc/me_en.html#2960

ME EN 2960 - 002 Found. Microsystems

ME EN 2960 - 002 Found. Microsystems

  • Class Number: 18183
  • Instructor: HOGAN, ALEXANDER
  • Component: Special Topics
  • Type: In Person
  • Units: 1.0
  • Wait List: No
  • Fees: $72.00
  • Seats Available: -1

ME EN 2960 - 003 Found. Microsystems

ME EN 2960 - 003 Found. Microsystems

  • Class Number: 18184
  • Instructor: HOGAN, ALEXANDER
  • Component: Special Topics
  • Type: In Person
  • Units: 1.0
  • Wait List: No
  • Fees: $72.00
  • Seats Available: 2

ME EN 3200 - 001 Mechatronics I


This course requires enrollment in a corresponding lab section. Sections 2-13 are associated with this lecture section. New transfer students must apply (http://tinyurl.com/UMETrApp) and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2012 are due April 15, 2012. Students who submit applications after this date will be considered for admission only if space is available.

ME EN 3200 - 001 Mechatronics I

  • Class Number: 1315
  • Instructor: MEEK, SANFORD
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 2

This course requires enrollment in a corresponding lab section. Sections 2-13 are associated with this lecture section. New transfer students must apply (http://tinyurl.com/UMETrApp) and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2012 are due April 15, 2012. Students who submit applications after this date will be considered for admission only if space is available.

ME EN 3200 - 002 Mechatronics I

ME EN 3200 - 002 Mechatronics I

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 0

ME EN 3200 - 003 Mechatronics I

ME EN 3200 - 003 Mechatronics I

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: -1

ME EN 3200 - 004 Mechatronics I

ME EN 3200 - 004 Mechatronics I

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: -1

ME EN 3200 - 005 Mechatronics I

ME EN 3200 - 005 Mechatronics I

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 1

ME EN 3200 - 006 Mechatronics I

ME EN 3200 - 006 Mechatronics I

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: -2

ME EN 3200 - 007 Mechatronics I

ME EN 3200 - 007 Mechatronics I

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 0

ME EN 3200 - 008 Mechatronics I

ME EN 3200 - 008 Mechatronics I

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 0

ME EN 3200 - 009 Mechatronics I

ME EN 3200 - 009 Mechatronics I

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 0

ME EN 3200 - 010 Mechatronics I

ME EN 3200 - 010 Mechatronics I

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: -1

ME EN 3200 - 011 Mechatronics I

ME EN 3200 - 011 Mechatronics I

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 3

ME EN 3200 - 012 Mechatronics I

ME EN 3200 - 012 Mechatronics I

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 0

ME EN 3200 - 013 Mechatronics I

ME EN 3200 - 013 Mechatronics I

  • Class Number:
  • Instructor: MEEK, SANFORD
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 3

ME EN 3300 - 001 Strength Of Materials


This course requires enrollment in a corresponding lab section. Sections 2-9 are associated with this lecture section. New transfer students must apply (http://tinyurl.com/UMETrApp) and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2012 are due April 15, 2012. Students who submit applications after this date will be considered for admission only if space is available.

ME EN 3300 - 001 Strength Of Materials

  • Class Number: 1320
  • Instructor: DEVRIES, LARRY
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 15

This course requires enrollment in a corresponding lab section. Sections 2-9 are associated with this lecture section. New transfer students must apply (http://tinyurl.com/UMETrApp) and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2012 are due April 15, 2012. Students who submit applications after this date will be considered for admission only if space is available.

ME EN 3300 - 002 Strength Of Materials

ME EN 3300 - 002 Strength Of Materials

  • Class Number:
  • Instructor: DEVRIES, LARRY
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 6

ME EN 3300 - 003 Strength Of Materials

ME EN 3300 - 003 Strength Of Materials

  • Class Number:
  • Instructor: DEVRIES, LARRY
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 0

ME EN 3300 - 004 Strength Of Materials

ME EN 3300 - 004 Strength Of Materials

  • Class Number:
  • Instructor: DEVRIES, LARRY
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 5

ME EN 3300 - 005 Strength Of Materials

ME EN 3300 - 005 Strength Of Materials

  • Class Number:
  • Instructor: DEVRIES, LARRY
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 1

ME EN 3300 - 006 Strength Of Materials

ME EN 3300 - 006 Strength Of Materials

  • Class Number:
  • Instructor: DEVRIES, LARRY
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 1

ME EN 3600 - 001 Thermodynamics II


This course requires enrollment in a corresponding lab section. Sections 2-12 are associated with this lecture section. New transfer students must apply (http://tinyurl.com/UMETrApp) and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2012 are due April 15, 2012. Students who submit applications after this date will be considered for admission only if space is available.

ME EN 3600 - 001 Thermodynamics II

  • Class Number: 1318
  • Instructor: AMEEL, TIM
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 13

This course requires enrollment in a corresponding lab section. Sections 2-12 are associated with this lecture section. New transfer students must apply (http://tinyurl.com/UMETrApp) and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2012 are due April 15, 2012. Students who submit applications after this date will be considered for admission only if space is available.

ME EN 3600 - 003 Thermodynamics II

ME EN 3600 - 003 Thermodynamics II

  • Class Number:
  • Instructor: AMEEL, TIM
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 1

ME EN 3600 - 004 Thermodynamics II

ME EN 3600 - 004 Thermodynamics II

  • Class Number:
  • Instructor: AMEEL, TIM
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 2

ME EN 3600 - 005 Thermodynamics II

ME EN 3600 - 005 Thermodynamics II

  • Class Number:
  • Instructor: AMEEL, TIM
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 2

ME EN 3600 - 006 Thermodynamics II

ME EN 3600 - 006 Thermodynamics II

  • Class Number:
  • Instructor: AMEEL, TIM
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 0

ME EN 3600 - 007 Thermodynamics II

ME EN 3600 - 007 Thermodynamics II

  • Class Number:
  • Instructor: AMEEL, TIM
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 1

ME EN 3600 - 008 Thermodynamics II

ME EN 3600 - 008 Thermodynamics II

  • Class Number:
  • Instructor: AMEEL, TIM
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 2

ME EN 3600 - 009 Thermodynamics II

ME EN 3600 - 009 Thermodynamics II

  • Class Number:
  • Instructor: AMEEL, TIM
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 1

ME EN 3600 - 010 Thermodynamics II

ME EN 3600 - 010 Thermodynamics II

  • Class Number:
  • Instructor: AMEEL, TIM
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 4

ME EN 3600 - 011 Thermodynamics II

ME EN 3600 - 011 Thermodynamics II

  • Class Number:
  • Instructor: AMEEL, TIM
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 0

ME EN 3700 - 001 Fluid Mechanics


This course requires enrollment in a corresponding lab section. Sections 2-23 are associated with this lecture section. New transfer students must apply (http://tinyurl.com/UMETrApp) and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2012 are due April 15, 2012. Students who submit applications after this date will be considered for admission only if space is available.

ME EN 3700 - 001 Fluid Mechanics

  • Class Number: 1319
  • Instructor: PARDYJAK, ERIC
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 3

This course requires enrollment in a corresponding lab section. Sections 2-23 are associated with this lecture section. New transfer students must apply (http://tinyurl.com/UMETrApp) and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2012 are due April 15, 2012. Students who submit applications after this date will be considered for admission only if space is available.

ME EN 3700 - 002 Fluid Mechanics

ME EN 3700 - 002 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 0

ME EN 3700 - 003 Fluid Mechanics

ME EN 3700 - 003 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 0

ME EN 3700 - 004 Fluid Mechanics

ME EN 3700 - 004 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 1

ME EN 3700 - 005 Fluid Mechanics

ME EN 3700 - 005 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: -1

ME EN 3700 - 006 Fluid Mechanics

ME EN 3700 - 006 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 0

ME EN 3700 - 007 Fluid Mechanics

ME EN 3700 - 007 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 0

ME EN 3700 - 008 Fluid Mechanics

ME EN 3700 - 008 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 0

ME EN 3700 - 009 Fluid Mechanics

ME EN 3700 - 009 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 0

ME EN 3700 - 010 Fluid Mechanics

ME EN 3700 - 010 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: -1

ME EN 3700 - 011 Fluid Mechanics

ME EN 3700 - 011 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 0

ME EN 3700 - 012 Fluid Mechanics

ME EN 3700 - 012 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: -1

ME EN 3700 - 013 Fluid Mechanics

ME EN 3700 - 013 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 0

ME EN 3700 - 014 Fluid Mechanics

ME EN 3700 - 014 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: -1

ME EN 3700 - 015 Fluid Mechanics

ME EN 3700 - 015 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 0

ME EN 3700 - 016 Fluid Mechanics

ME EN 3700 - 016 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 0

ME EN 3700 - 017 Fluid Mechanics

ME EN 3700 - 017 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 0

ME EN 3700 - 018 Fluid Mechanics

ME EN 3700 - 018 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 0

ME EN 3700 - 019 Fluid Mechanics

ME EN 3700 - 019 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 0

ME EN 3700 - 020 Fluid Mechanics

ME EN 3700 - 020 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 0

ME EN 3700 - 021 Fluid Mechanics

ME EN 3700 - 021 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 0

ME EN 3700 - 022 Fluid Mechanics

ME EN 3700 - 022 Fluid Mechanics

  • Class Number:
  • Instructor: PARDYJAK, ERIC
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 0

ME EN 3900 - 001 Professionalism Seminar


New transfer students must apply (http://tinyurl.com/UMETrApp) and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2012 are due April 15, 2012. Students who submit applications after this date will be considered for admission only if space is available.

ME EN 3900 - 001 Professionalism Seminar

  • Class Number: 1321
  • Instructor: MASCARO, DEBRA J
  • Component: Seminar
  • Type: In Person
  • Units: 0.5
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 28

New transfer students must apply (http://tinyurl.com/UMETrApp) and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2012 are due April 15, 2012. Students who submit applications after this date will be considered for admission only if space is available.

ME EN 4000 - 001 Engineering Design I

ME EN 4000 - 001 Engineering Design I

ME EN 4060 - 001 Manufacturing

ME EN 4060 - 001 Manufacturing

  • Class Number: 14679
  • Instructor: BALAJI, A.K.
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 57

ME EN 4999 - 001 Honors Thesis/Project

ME EN 4999 - 001 Honors Thesis/Project

  • Class Number: 2138
  • Instructor: CHEN, KUAN
  • Component: Honors Thesis Project
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 10

ME EN 5100 - 001 Ergonomics

ME EN 5100 - 001 Ergonomics

  • Class Number: 7636
  • Instructor: BLOSWICK, DONALD
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 9

ME EN 5200 - 001 Classical Control Sys

ME EN 5200 - 001 Classical Control Sys

  • Class Number: 1326
  • Instructor: ABBOTT, JAKE
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 34
  • Class Number: 16775
  • Instructor: MASCARO, STEPHEN A
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 9
  • Class Number: 2973
  • Instructor: HOLLERBACH, JOHN
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 9

ME EN 5240 - 001 Advanced Mechatronics


Instructor permission is required to take this course. Please see http://mech.utah.edu/adv_mechatronics/index.php/Main/CourseDetails and have your ME32010 instructor contact the instructor (wil@mech.utah.edu) to get into this course. This course has required lab time outside of lecture. Labs will be held in MEB 2265 at a time to be determined on the first day of class. Students will be required to purchase electronics to complete each lab. Term project costs will vary.

ME EN 5240 - 001 Advanced Mechatronics

  • Class Number: 16179
  • Instructor: PROVANCHER, WILLIAM
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $95.00
  • Seats Available: 5

Instructor permission is required to take this course. Please see http://mech.utah.edu/adv_mechatronics/index.php/Main/CourseDetails and have your ME32010 instructor contact the instructor (wil@mech.utah.edu) to get into this course. This course has required lab time outside of lecture. Labs will be held in MEB 2265 at a time to be determined on the first day of class. Students will be required to purchase electronics to complete each lab. Term project costs will vary.
  • Class Number: 16777
  • Instructor: JOHNSON, DAVID
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 3

ME EN 5300 - 001 Adv Strength

ME EN 5300 - 001 Adv Strength

  • Class Number: 1323
  • Instructor: LEELAVANICHKUL, SEUBPONG
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 37

ME EN 5510 - 001 Finite Elements

ME EN 5510 - 001 Finite Elements

  • Class Number: 1324
  • Instructor: COATS, BRITTANY
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $25.00
  • Seats Available: 19

ME EN 5600 - 001 Intermediate Thermo.

ME EN 5600 - 001 Intermediate Thermo.

  • Class Number: 16183
  • Instructor: CHEN, KUAN
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 0

ME EN 5620 - 001 Fund Microscale Eng

ME EN 5620 - 001 Fund Microscale Eng

  • Class Number: 16185
  • Instructor: RAEYMAEKERS, BART
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 10

ME EN 5700 - 001 Int Fluid Dynamics

ME EN 5700 - 001 Int Fluid Dynamics

  • Class Number: 9204
  • Instructor: STOLL, ROB
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 14

Enrollment in this course requires the approval of Dr. Mascaro (dmascaro@mech.utah.edu).

ME EN 5910 - 001 Co-Op

  • Class Number: 16146
  • Instructor: MASCARO, DEBRA J
  • Component: Clinical
  • Type: In Person
  • Units: 1.0 - 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Enrollment in this course requires the approval of Dr. Mascaro (dmascaro@mech.utah.edu).

ME EN 5920 - 001 Design Project


Each faculty member is assigned a unique section of ME EN 5920. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5920 - 001 Design Project

  • Class Number: 2143
  • Instructor: AMEEL, TIM
  • Component: Special Projects
  • Type: In Person
  • Units: 1.0 - 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 5920. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5930 - 001 Undergrad Thesis


Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5930 - 001 Undergrad Thesis

  • Class Number: 5547
  • Instructor: AMEEL, TIM
  • Component: Independent Study
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5950 - 001 Indep Study


Each faculty member is assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5950 - 001 Indep Study

  • Class Number: 3900
  • Instructor: AMEEL, TIM
  • Component: Independent Study
  • Type: In Person
  • Units: 1.0 - 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5960 - 004 Advanced Manufacturing


This class meets in MEB 1221 with ME EN 6960-004. Please contact the instructor to be placed on the registration list.

ME EN 5960 - 004 Advanced Manufacturing

  • Class Number: 11199
  • Instructor: SLOWIK, TOM S
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $25.00
  • Seats Available: 1

This class meets in MEB 1221 with ME EN 6960-004. Please contact the instructor to be placed on the registration list.

ME EN 5960 - 005 Advanced Manufacturing


This class meets in MEB 1221 with ME EN 6960-005. Please contact the instructor to be placed on the registration list.

ME EN 5960 - 005 Advanced Manufacturing

  • Class Number: 11463
  • Instructor: SLOWIK, TOM S
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $25.00
  • Seats Available: 3

This class meets in MEB 1221 with ME EN 6960-005. Please contact the instructor to be placed on the registration list.

ME EN 5960 - 011 Microsensors


Students must also register for the lab ME EN 5960 section 012, 013, or 014.

ME EN 5960 - 011 Microsensors


Students must also register for the lab ME EN 5960 section 012, 013, or 014.

ME EN 5960 - 012 Microsensors Lab

ME EN 5960 - 012 Microsensors Lab

  • Class Number: 16828
  • Instructor: KIM, HANSEUP
  • Instructor: RAHMAN, MAHBUBUR
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $126.00
  • Seats Available: 3

ME EN 5960 - 013 Microsensors Lab

ME EN 5960 - 013 Microsensors Lab

  • Class Number: 16829
  • Instructor: KIM, HANSEUP
  • Instructor: RAHMAN, MAHBUBUR
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $126.00
  • Seats Available: 3

ME EN 5960 - 014 Microsensors Lab

ME EN 5960 - 014 Microsensors Lab

  • Class Number: 16830
  • Instructor: KIM, HANSEUP
  • Instructor: RAHMAN, MAHBUBUR
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $126.00
  • Seats Available: 3

ME EN 6100 - 002 Ergonomics

ME EN 6100 - 002 Ergonomics

  • Class Number: 7637
  • Instructor: BLOSWICK, DONALD
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 14

ME EN 6200 - 001 Classical Control Sys

ME EN 6200 - 001 Classical Control Sys

  • Class Number: 2144
  • Instructor: ABBOTT, JAKE
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: -7
  • Class Number: 16776
  • Instructor: MASCARO, STEPHEN A
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 13
  • Class Number: 2972
  • Instructor: HOLLERBACH, JOHN
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 14
  • Class Number: 12946
  • Instructor: JOHNSON, DAVID
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 13

ME EN 6240 - 001 Advanced Mechatronics


This course has required lab time outside of lecture. Labs will be held in MEB 2265 at a time to be determined on the first day of class. Students will be required to purchase electronics to complete each lab (~$35 per student total). Term project costs will vary. Please see http://mech.utah.edu/adv_mechatronics/index.php/Main/CourseDetails for details on the course and what you should do if the course becomes full.

ME EN 6240 - 001 Advanced Mechatronics

  • Class Number: 16180
  • Instructor: PROVANCHER, WILLIAM
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $95.00
  • Seats Available: -5

This course has required lab time outside of lecture. Labs will be held in MEB 2265 at a time to be determined on the first day of class. Students will be required to purchase electronics to complete each lab (~$35 per student total). Term project costs will vary. Please see http://mech.utah.edu/adv_mechatronics/index.php/Main/CourseDetails for details on the course and what you should do if the course becomes full.
  • Class Number: 16778
  • Instructor: JOHNSON, DAVID
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 9

ME EN 6300 - 001 Adv. Strength

ME EN 6300 - 001 Adv. Strength

  • Class Number: 2145
  • Instructor: LEELAVANICHKUL, SEUBPONG
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 13

ME EN 6510 - 001 Finite Elements

ME EN 6510 - 001 Finite Elements

  • Class Number: 2146
  • Instructor: COATS, BRITTANY
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $25.00
  • Seats Available: -2

ME EN 6600 - 001 Intermediate Thermo.

ME EN 6600 - 001 Intermediate Thermo.

  • Class Number: 16184
  • Instructor: CHEN, KUAN
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 2

ME EN 6620 - 001 Fund Microscale Eng

ME EN 6620 - 001 Fund Microscale Eng

  • Class Number: 16186
  • Instructor: RAEYMAEKERS, BART
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 9

ME EN 6700 - 001 Int Fluid Dynamics

ME EN 6700 - 001 Int Fluid Dynamics

  • Class Number: 9205
  • Instructor: STOLL, ROB
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 13

ME EN 6950 - 001 Indep Study


Each faculty member is assigned a unique section of ME EN 6950. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.

ME EN 6950 - 001 Indep Study

  • Class Number: 3901
  • Instructor: AMEEL, TIM
  • Component: Independent Study
  • Type: In Person
  • Units: 1.0 - 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 6950. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.

ME EN 6955 - 001 Special Project


Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.

ME EN 6955 - 001 Special Project

  • Class Number: 4987
  • Instructor: AMEEL, TIM
  • Component: Special Projects
  • Type: In Person
  • Units: 1.0 - 4.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.

ME EN 6960 - 004 Advanced Manufacturing


Please contact the instructor to be placed on the registration list.

ME EN 6960 - 004 Advanced Manufacturing

  • Class Number: 12578
  • Instructor: SLOWIK, TOM S
  • Component: Lecture
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $25.00
  • Seats Available: -1

Please contact the instructor to be placed on the registration list.

ME EN 6960 - 005 Advanced Manufacturing


Please contact the instructor to be placed on the registration list.

ME EN 6960 - 005 Advanced Manufacturing

  • Class Number: 12579
  • Instructor: SLOWIK, TOM S
  • Component: Lecture
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $25.00
  • Seats Available: 2

Please contact the instructor to be placed on the registration list.

ME EN 6960 - 008 Fund of Systems Engineering

ME EN 6960 - 008 Fund of Systems Engineering

  • Class Number: 12202
  • Instructor: GOLDBERG, BENJAMIN E
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

ME EN 6960 - 009 Systems Eng III - Capstone

ME EN 6960 - 009 Systems Eng III - Capstone

  • Class Number: 10853
  • Instructor: GOLDBERG, BENJAMIN E
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 11

ME EN 6960 - 010 Work & Envirnmntl Physiology

ME EN 6960 - 010 Work & Envirnmntl Physiology

  • Class Number: 18058
  • Instructor: BERNARD, THOMAS
  • Component: Lecture
  • Type: In Person
  • Units: 2.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 6

ME EN 6960 - 011 Microsensors


Students must also register for the lab ME EN 6960 section 012, 013, or 014.

ME EN 6960 - 011 Microsensors


Students must also register for the lab ME EN 6960 section 012, 013, or 014.

ME EN 6960 - 012 Microsensors Lab

ME EN 6960 - 012 Microsensors Lab

  • Class Number: 13700
  • Instructor: KIM, HANSEUP
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $126.00
  • Seats Available: 2

ME EN 6960 - 013 Microsensors Lab

ME EN 6960 - 013 Microsensors Lab

  • Class Number: 13743
  • Instructor: KIM, HANSEUP
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $126.00
  • Seats Available: 2

ME EN 6960 - 014 Microsensors Lab

ME EN 6960 - 014 Microsensors Lab

  • Class Number: 13744
  • Instructor: KIM, HANSEUP
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $126.00
  • Seats Available: 2

ME EN 6960 - 022 Manufacturing Practices

ME EN 6960 - 022 Manufacturing Practices

  • Class Number: 16176
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 3

ME EN 6960 - 023 Manufacturing Practices

ME EN 6960 - 023 Manufacturing Practices

  • Class Number: 16177
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 5