Departmental Advisors
Undergraduate Studies Office
Debra Mascaro
MEB 2220
Graduate Studies Office
A.K. Balaji
MEB 2110 - (801)585-6414
Departmental Notes
For course descriptions and pre-requisite information click on the subject column next to the appropriate catalog number.
THIS DEPARTMENT ENFORCES UNDERGRADUATE PREREQUISITES. Please note that the registration system may not factor in transfer work when determining if prerequisites have been met. If you are unable to register for a course and think you have met the prerequisite(s), please contact an advisor from this department to inquire about obtaining a permission code. You may be administratively dropped from a course if the prerequisite has not been met.
Attention: Classroom assignments may change between the time you
register and when classes begin. Please check your class schedule for the latest classroom location
information before attending class.
ME EN 1000 - 001 Intro Desgn for Eng Sys
This course requires enrollment in a corresponding lab section. Sections 2-9 are associated with this lecture section. Students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 1000 - 001 Intro Desgn for Eng Sys
- Class Number: 1291
- Instructor: MERRYWEATHER, ANDREW
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: 14
This course requires enrollment in a corresponding lab section. Sections 2-9 are associated with this lecture section. Students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 1000 - 002 Intro Desgn for Eng Sys
ME EN 1000 - 002 Intro Desgn for Eng Sys
- Class Number:
- Instructor: MERRYWEATHER, ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: 0
ME EN 1000 - 003 Intro Desgn for Eng Sys
ME EN 1000 - 003 Intro Desgn for Eng Sys
- Class Number:
- Instructor: MERRYWEATHER, ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: 0
ME EN 1000 - 004 Intro Desgn for Eng Sys
ME EN 1000 - 004 Intro Desgn for Eng Sys
- Class Number:
- Instructor: MERRYWEATHER, ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: 0
ME EN 1000 - 005 Intro Desgn for Eng Sys
ME EN 1000 - 005 Intro Desgn for Eng Sys
- Class Number:
- Instructor: MERRYWEATHER, ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: 0
ME EN 1000 - 006 Intro Desgn for Eng Sys
ME EN 1000 - 006 Intro Desgn for Eng Sys
- Class Number:
- Instructor: MERRYWEATHER, ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: -4
ME EN 1000 - 007 Intro Desgn for Eng Sys
ME EN 1000 - 007 Intro Desgn for Eng Sys
- Class Number:
- Instructor: MERRYWEATHER, ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: 0
ME EN 1000 - 009 Intro Desgn for Eng Sys
ME EN 1000 - 009 Intro Desgn for Eng Sys
- Class Number:
- Instructor: MERRYWEATHER, ANDREW
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $105.00
- Seats Available: -2
ME EN 1005 - 001 CAD Lab
ME EN 1005 - 001 CAD Lab
- Class Number: 5999
- Instructor: BALMFORTH, BRIC
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Seats Available: 13
ME EN 1010 - 001 Cmptr Prob Solv Eng Sys
This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 1010 - 001 Cmptr Prob Solv Eng Sys
- Class Number:
- Instructor: MASCARO, DEBRA J
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 7
This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 1010 - 002 Cmptr Prob Solv Eng Sys
ME EN 1010 - 002 Cmptr Prob Solv Eng Sys
- Class Number: 17491
- Instructor: MASCARO, DEBRA J
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: -8
ME EN 1300 - 001 Statics/Strength
ME EN 1300 - 001 Statics/Strength
- Class Number: 1292
- Instructor: BRANNON, REBECCA M
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 38
ME EN 2020 - 001 Particle Dynamics
This class meets with ME EN 2080-001.
ME EN 2020 - 001 Particle Dynamics
- Class Number: 2514
- Instructor: SANDQUIST, GARY
- Component: Lecture
- Type: In Person
- Units: 2.0
- Requisites: Yes
- Wait List: No
- Seats Available: 20
This class meets with ME EN 2080-001.
ME EN 2080 - 001 Dynamics
New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available. This class meets with ME EN 2020-001 during the first half of the semester.
ME EN 2080 - 001 Dynamics
- Class Number: 1294
- Instructor: SANDQUIST, GARY
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 11
New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available. This class meets with ME EN 2020-001 during the first half of the semester.
ME EN 2300 - 001 Thermodynamics I
New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 2300 - 001 Thermodynamics I
- Class Number: 16262
- Instructor: SILCOX, GEOFFREY
- Component: Lecture
- Type: In Person
- Units: 2.0
- Requisites: Yes
- Wait List: No
- Seats Available: 8
New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 2300 - 090 Thermodynamics I
This is an online course, which does not meet in-class. For additional information, please visit http://uonline.utah.edu or call (801) 585-5959. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 2300 - 090 Thermodynamics I
- Class Number: 17969
- Instructor: SILCOX, GEOFFREY
- Component: Lecture
- Type: In Person
- Units: 2.0
- Requisites: Yes
- Wait List: No
- Fees: $30.00
- Seats Available: 24
This is an online course, which does not meet in-class. For additional information, please visit http://uonline.utah.edu or call (801) 585-5959. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 2450 - 001 Num Methods for Eng Sys
This course requires enrollment in a corresponding lab section. Sections 2-7 are associated with this lecture section. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 2450 - 001 Num Methods for Eng Sys
- Class Number: 16216
- Instructor: GALE, BRUCE
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 19
This course requires enrollment in a corresponding lab section. Sections 2-7 are associated with this lecture section. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 2450 - 002 Num Methods for Eng Sys
ME EN 2450 - 002 Num Methods for Eng Sys
- Class Number:
- Instructor: GALE, BRUCE
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Seats Available: 3
ME EN 2450 - 003 Num Methods for Eng Sys
ME EN 2450 - 003 Num Methods for Eng Sys
- Class Number:
- Instructor: GALE, BRUCE
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Seats Available: 0
ME EN 2450 - 004 Num Methods for Eng Sys
ME EN 2450 - 004 Num Methods for Eng Sys
- Class Number:
- Instructor: GALE, BRUCE
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Seats Available: 4
ME EN 2450 - 005 Num Methods for Eng Sys
ME EN 2450 - 005 Num Methods for Eng Sys
- Class Number:
- Instructor: GALE, BRUCE
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Seats Available: 0
ME EN 2450 - 006 Num Methods for Eng Sys
ME EN 2450 - 006 Num Methods for Eng Sys
- Class Number:
- Instructor: GALE, BRUCE
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Seats Available: 1
ME EN 2450 - 007 Num Methods for Eng Sys
ME EN 2450 - 007 Num Methods for Eng Sys
- Class Number:
- Instructor: GALE, BRUCE
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Seats Available: 1
ME EN 2650 - 001 Manufact for Eng Sys
New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 2650 - 001 Manufact for Eng Sys
- Class Number: 17260
- Instructor: BALAJI, A.K.
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 2
New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 2655 - 001 Manufacturing Lab
ME EN 2655 - 001 Manufacturing Lab
- Class Number: 8825
- Instructor: BALAJI, A.K.
- Instructor: KNUTSON, MICHAEL P
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 1
ME EN 2655 - 002 Manufacturing Lab
ME EN 2655 - 002 Manufacturing Lab
- Class Number: 8826
- Instructor: BALAJI, A.K.
- Instructor: KNUTSON, MICHAEL P
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 1
ME EN 2655 - 003 Manufacturing Lab
ME EN 2655 - 003 Manufacturing Lab
- Class Number: 10192
- Instructor: BALAJI, A.K.
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 0
ME EN 2655 - 004 Manufacturing Lab
ME EN 2655 - 004 Manufacturing Lab
- Class Number: 10193
- Instructor: BALAJI, A.K.
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: -2
ME EN 2655 - 005 Manufacturing Lab
ME EN 2655 - 005 Manufacturing Lab
- Class Number: 12907
- Instructor: BALAJI, A.K.
- Instructor: KNUTSON, MICHAEL P
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $80.00
- Seats Available: 1
ME EN 2960 - 001 Found. Microsystems
This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place. The course description can be found here: http://www.acs.utah.edu/GenCatalog/1118/crsdesc/me_en.html#2960
ME EN 2960 - 001 Found. Microsystems
- Class Number: 12588
- Instructor: SMITH, JAMES
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Wait List: No
- Fees: $72.00
- Seats Available: 0
This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place. The course description can be found here: http://www.acs.utah.edu/GenCatalog/1118/crsdesc/me_en.html#2960
ME EN 2960 - 002 Found. Microsystems
ME EN 2960 - 002 Found. Microsystems
- Class Number: 14038
- Instructor: SMITH, JAMES
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Wait List: No
- Fees: $72.00
- Seats Available: 0
ME EN 2960 - 003 Found. Microsystems
ME EN 2960 - 003 Found. Microsystems
- Class Number: 14039
- Instructor: SMITH, JAMES
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Wait List: No
- Fees: $72.00
- Seats Available: 0
ME EN 3000 - 001 Design of Mech Elements
New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 3000 - 001 Design of Mech Elements
- Class Number: 16263
- Instructor: RAEYMAEKERS, BART
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $5.00
- Seats Available: 3
New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 3200 - 001 Mechatronics I
This course requires enrollment in a corresponding lab section. Sections 2-13 are associated with this lecture section. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 3200 - 001 Mechatronics I
- Class Number: 1295
- Instructor: MEEK, SANFORD
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 3
This course requires enrollment in a corresponding lab section. Sections 2-13 are associated with this lecture section. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 3200 - 002 Mechatronics I
ME EN 3200 - 002 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: -1
ME EN 3200 - 003 Mechatronics I
ME EN 3200 - 003 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 2
ME EN 3200 - 004 Mechatronics I
ME EN 3200 - 004 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 3200 - 005 Mechatronics I
ME EN 3200 - 005 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: -2
ME EN 3200 - 006 Mechatronics I
ME EN 3200 - 006 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 3200 - 007 Mechatronics I
ME EN 3200 - 007 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: -1
ME EN 3200 - 008 Mechatronics I
ME EN 3200 - 008 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 3200 - 009 Mechatronics I
ME EN 3200 - 009 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 1
ME EN 3200 - 010 Mechatronics I
ME EN 3200 - 010 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: -2
ME EN 3200 - 011 Mechatronics I
ME EN 3200 - 011 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: -3
ME EN 3200 - 012 Mechatronics I
ME EN 3200 - 012 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 3200 - 013 Mechatronics I
ME EN 3200 - 013 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 3200 - 014 Mechatronics I
ME EN 3200 - 014 Mechatronics I
- Class Number:
- Instructor: MEEK, SANFORD
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $100.00
- Seats Available: 0
ME EN 3300 - 001 Strength Of Materials
This course requires enrollment in a corresponding lab section. Sections 2-9 are associated with this lecture section. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 3300 - 001 Strength Of Materials
- Class Number: 1300
- Instructor: MONSON, KEN L
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: -9
This course requires enrollment in a corresponding lab section. Sections 2-9 are associated with this lecture section. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 3300 - 002 Strength Of Materials
ME EN 3300 - 002 Strength Of Materials
- Class Number:
- Instructor: MONSON, KEN L
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 0
ME EN 3300 - 003 Strength Of Materials
ME EN 3300 - 003 Strength Of Materials
- Class Number:
- Instructor: MONSON, KEN L
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 0
ME EN 3300 - 004 Strength Of Materials
ME EN 3300 - 004 Strength Of Materials
- Class Number:
- Instructor: MONSON, KEN L
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 0
ME EN 3300 - 005 Strength Of Materials
ME EN 3300 - 005 Strength Of Materials
- Class Number:
- Instructor: MONSON, KEN L
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 0
ME EN 3300 - 006 Strength Of Materials
ME EN 3300 - 006 Strength Of Materials
- Class Number:
- Instructor: MONSON, KEN L
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: -1
ME EN 3300 - 007 Strength Of Materials
ME EN 3300 - 007 Strength Of Materials
- Class Number:
- Instructor: MONSON, KEN L
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 2
ME EN 3300 - 008 Strength Of Materials
ME EN 3300 - 008 Strength Of Materials
- Class Number:
- Instructor: MONSON, KEN L
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: -1
ME EN 3300 - 009 Strength Of Materials
ME EN 3300 - 009 Strength Of Materials
- Class Number:
- Instructor: MONSON, KEN L
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 0
ME EN 3300 - 010 Strength Of Materials
ME EN 3300 - 010 Strength Of Materials
- Class Number:
- Instructor: MONSON, KEN L
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 0
ME EN 3600 - 001 Thermodynamics II
This course requires enrollment in a corresponding lab section. Sections 2-12 are associated with this lecture section. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 3600 - 001 Thermodynamics II
- Class Number: 1298
- Instructor: SMITH, AMANDA D
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 2
This course requires enrollment in a corresponding lab section. Sections 2-12 are associated with this lecture section. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 3600 - 003 Thermodynamics II
ME EN 3600 - 003 Thermodynamics II
- Class Number:
- Instructor: SMITH, AMANDA D
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 0
ME EN 3600 - 004 Thermodynamics II
ME EN 3600 - 004 Thermodynamics II
- Class Number:
- Instructor: SMITH, AMANDA D
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 0
ME EN 3600 - 005 Thermodynamics II
ME EN 3600 - 005 Thermodynamics II
- Class Number:
- Instructor: SMITH, AMANDA D
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 2
ME EN 3600 - 006 Thermodynamics II
ME EN 3600 - 006 Thermodynamics II
- Class Number:
- Instructor: SMITH, AMANDA D
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 2
ME EN 3600 - 007 Thermodynamics II
ME EN 3600 - 007 Thermodynamics II
- Class Number:
- Instructor: SMITH, AMANDA D
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 1
ME EN 3600 - 008 Thermodynamics II
ME EN 3600 - 008 Thermodynamics II
- Class Number:
- Instructor: SMITH, AMANDA D
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: -2
ME EN 3600 - 009 Thermodynamics II
ME EN 3600 - 009 Thermodynamics II
- Class Number:
- Instructor: SMITH, AMANDA D
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 0
ME EN 3600 - 010 Thermodynamics II
ME EN 3600 - 010 Thermodynamics II
- Class Number:
- Instructor: SMITH, AMANDA D
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 0
ME EN 3600 - 011 Thermodynamics II
ME EN 3600 - 011 Thermodynamics II
- Class Number:
- Instructor: SMITH, AMANDA D
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: -1
ME EN 3650 - 001 Heat Transfer
This course requires enrollment in a corresponding lab section. Sections 2-4 are associated with this lecture. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 3650 - 001 Heat Transfer
- Class Number: 14419
- Instructor: AMEEL, TIM
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 15
This course requires enrollment in a corresponding lab section. Sections 2-4 are associated with this lecture. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 3650 - 002 Heat Transfer
ME EN 3650 - 002 Heat Transfer
- Class Number:
- Instructor: AMEEL, TIM
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: -3
ME EN 3650 - 003 Heat Transfer
ME EN 3650 - 003 Heat Transfer
- Class Number:
- Instructor: AMEEL, TIM
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $35.00
- Seats Available: 0
ME EN 3700 - 001 Fluid Mechanics
This course requires enrollment in a corresponding lab section. Sections 2-23 are associated with this lecture section. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 3700 - 001 Fluid Mechanics
- Class Number: 1299
- Instructor: CALAF, MARC
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 21
This course requires enrollment in a corresponding lab section. Sections 2-23 are associated with this lecture section. New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 3700 - 002 Fluid Mechanics
ME EN 3700 - 002 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 003 Fluid Mechanics
ME EN 3700 - 003 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 004 Fluid Mechanics
ME EN 3700 - 004 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 005 Fluid Mechanics
ME EN 3700 - 005 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 006 Fluid Mechanics
ME EN 3700 - 006 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 1
ME EN 3700 - 007 Fluid Mechanics
ME EN 3700 - 007 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 1
ME EN 3700 - 008 Fluid Mechanics
ME EN 3700 - 008 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: -1
ME EN 3700 - 009 Fluid Mechanics
ME EN 3700 - 009 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 010 Fluid Mechanics
ME EN 3700 - 010 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: -1
ME EN 3700 - 011 Fluid Mechanics
ME EN 3700 - 011 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: -1
ME EN 3700 - 012 Fluid Mechanics
ME EN 3700 - 012 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 013 Fluid Mechanics
ME EN 3700 - 013 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 014 Fluid Mechanics
ME EN 3700 - 014 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 015 Fluid Mechanics
ME EN 3700 - 015 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 016 Fluid Mechanics
ME EN 3700 - 016 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 017 Fluid Mechanics
ME EN 3700 - 017 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 018 Fluid Mechanics
ME EN 3700 - 018 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 019 Fluid Mechanics
ME EN 3700 - 019 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: -1
ME EN 3700 - 020 Fluid Mechanics
ME EN 3700 - 020 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 2
ME EN 3700 - 021 Fluid Mechanics
ME EN 3700 - 021 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 0
ME EN 3700 - 022 Fluid Mechanics
ME EN 3700 - 022 Fluid Mechanics
- Class Number:
- Instructor: CALAF, MARC
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 2
ME EN 3900 - 001 Professionalism Seminar
New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 3900 - 001 Professionalism Seminar
- Class Number: 1301
- Instructor: MASCARO, DEBRA J
- Component: Seminar
- Type: In Person
- Units: 0.5
- Requisites: Yes
- Wait List: No
- Seats Available: 5
New transfer students must apply and be admitted to the Mechanical Engineering Undergraduate Program in order to enroll in this course. Applications for Fall 2014 are due March 15, 2014. Students who submit applications after this date will be considered for admission only if space is available.
ME EN 4000 - 001 Engineering Design I
ME EN 4000 - 001 Engineering Design I
- Class Number: 1302
- Instructor: Roundy, Shad
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $75.00
- Seats Available: 12
ME EN 4060 - 001 Manufacturing
ME EN 4060 - 001 Manufacturing
- Class Number: 12164
- Instructor: BALAJI, A.K.
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
ME EN 4999 - 001 Honors Thesis/Project
ME EN 4999 - 001 Honors Thesis/Project
- Class Number: 1983
- Instructor: CHEN, KUAN
- Component: Honors Thesis Project
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 9
ME EN 5200 - 001 Classical Control Sys
ME EN 5200 - 001 Classical Control Sys
- Class Number: 1306
- Instructor: GRIEVE, THOMAS
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 28
ME EN 5205 - 001 System Dynamics
ME EN 5205 - 001 System Dynamics
- Class Number: 13264
- Instructor: MEEK, SANFORD
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 4
ME EN 5220 - 001 Robotics
ME EN 5220 - 001 Robotics
- Class Number: 2722
- Instructor: HOLLERBACH, JOHN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 9
ME EN 5240 - 001 Advanced Mechatronics
Instructor permission is required to take this course. Please see http://mech.utah.edu/adv_mechatronics/index.php/Main/CourseDetails and have your ME32010 instructor contact the instructor (adoxon@gmail.com) to get into this course. This course has required lab time outside of lecture. Labs will be held in MEB 2265 at a time to be determined on the first day of class. Students will be required to purchase electronics to complete each lab (~$35 per student total). Term project costs will vary.
ME EN 5240 - 001 Advanced Mechatronics
- Class Number: 12954
- Instructor: DOXON, ANDREW
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Fees: $95.00
- Seats Available: 1
Instructor permission is required to take this course. Please see http://mech.utah.edu/adv_mechatronics/index.php/Main/CourseDetails and have your ME32010 instructor contact the instructor (adoxon@gmail.com) to get into this course. This course has required lab time outside of lecture. Labs will be held in MEB 2265 at a time to be determined on the first day of class. Students will be required to purchase electronics to complete each lab (~$35 per student total). Term project costs will vary.
ME EN 5250 - 001 Programming for Engin
ME EN 5250 - 001 Programming for Engin
- Class Number: 13266
- Instructor: JOHNSON, DAVID
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: -4
ME EN 5300 - 001 Adv Strength
ME EN 5300 - 001 Adv Strength
- Class Number: 1303
- Instructor: DEVRIES, LARRY
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 23
ME EN 5510 - 001 Finite Elements
ME EN 5510 - 001 Finite Elements
- Class Number: 1304
- Instructor: COATS, BRITTANY
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 11
ME EN 5600 - 001 Intermediate Thermo.
ME EN 5600 - 001 Intermediate Thermo.
- Class Number: 16265
- Instructor: CHEN, KUAN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 6
ME EN 5620 - 001 Fund Microscale Eng
ME EN 5620 - 001 Fund Microscale Eng
- Class Number: 16267
- Instructor: SMITH, JAMES
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 16
ME EN 5700 - 001 Int Fluid Dynamics
ME EN 5700 - 001 Int Fluid Dynamics
- Class Number: 8170
- Instructor: PARDYJAK, ERIC
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 0
ME EN 5800 - 001 Sustainable Energy
ME EN 5800 - 001 Sustainable Energy
- Class Number: 14426
- Instructor: UDELL, KENT S
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
ME EN 5810 - 001 Thermal Sys Des
ME EN 5810 - 001 Thermal Sys Des
- Class Number: 16271
- Instructor: DILLON, M
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
ME EN 5910 - 001 Co-Op
First semester of part-time co-op credit. See http://forms.mech.utah.edu/forms-current-student/me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5910 - 001 Co-Op
- Class Number: 12923
- Instructor: MASCARO, DEBRA J
- Component: Clinical
- Type: In Person
- Units: 1.5
- Requisites: Yes
- Wait List: No
- Seats Available: 10
First semester of part-time co-op credit. See http://forms.mech.utah.edu/forms-current-student/me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5910 - 002 Co-Op
Second semester of part-time co-op credit. See http://forms.mech.utah.edu/forms-current-student/me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5910 - 002 Co-Op
- Class Number: 17967
- Instructor: MASCARO, DEBRA J
- Component: Clinical
- Type: In Person
- Units: 1.5
- Requisites: Yes
- Wait List: No
- Seats Available: 14
Second semester of part-time co-op credit. See http://forms.mech.utah.edu/forms-current-student/me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5910 - 003 Co-Op
Full-time co-op credit. See http://forms.mech.utah.edu/forms-current-student/me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5910 - 003 Co-Op
- Class Number: 17968
- Instructor: MASCARO, DEBRA J
- Component: Clinical
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 13
Full-time co-op credit. See http://forms.mech.utah.edu/forms-current-student/me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.
ME EN 5920 - 001 Design Project
Each faculty member is assigned a unique section of ME EN 5920. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5920 - 001 Design Project
- Class Number: 1988
- Instructor: AMEEL, TIM
- Component: Special Projects
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 5920. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5930 - 001 Undergrad Thesis
Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5930 - 001 Undergrad Thesis
- Class Number: 5070
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5950 - 001 Indep Study
Each faculty member is assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5950 - 001 Indep Study
- Class Number: 3562
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.
ME EN 5960 - 001 Intermediate Heat Transfer
ME EN 5960 - 001 Intermediate Heat Transfer
- Class Number: 16269
- Instructor: PARK, KEUNHAN
- Component: Special Topics
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
ME EN 5960 - 002 Product & Indust Safety
ME EN 5960 - 002 Product & Indust Safety
- Class Number: 17694
- Instructor: DENTREMONT, KEN L
- Component: Special Topics
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Seats Available: -4
ME EN 5960 - 004 Advanced Manufacturing
This class meets in MEB 1221 with ME EN 6960-004. Please contact the instructor to be placed on the registration list.
ME EN 5960 - 004 Advanced Manufacturing
- Class Number: 9775
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 0
This class meets in MEB 1221 with ME EN 6960-004. Please contact the instructor to be placed on the registration list.
ME EN 5960 - 005 Advanced Manufacturing
This class meets in MEB 1221 with ME EN 6960-005. Please contact the instructor to be placed on the registration list.
ME EN 5960 - 005 Advanced Manufacturing
- Class Number: 9992
- Instructor: SLOWIK, TOM S
- Component: Laboratory
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 1
This class meets in MEB 1221 with ME EN 6960-005. Please contact the instructor to be placed on the registration list.
ME EN 5960 - 006 Biomechanics I
ME EN 5960 - 006 Biomechanics I
- Class Number: 15852
- Instructor: WEISS, JEFFREY
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
ME EN 5960 - 010 Scanning Electron Microscopy
There is also a 2-hour lab, times TBA. Contact instructor for details.
ME EN 5960 - 010 Scanning Electron Microscopy
- Class Number: 17437
- Instructor: DELONG, MATTHEW
- Component: Lecture
- Type: In Person
- Units: 3.0 - 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
There is also a 2-hour lab, times TBA. Contact instructor for details.
ME EN 5960 - 011 Microsensors
Sections 12 - 14 belong to this lecture. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.
ME EN 5960 - 011 Microsensors
- Class Number:
- Instructor: SOLZBACHER, FLORIAN
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Sections 12 - 14 belong to this lecture. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.
ME EN 5960 - 012 Microsensors Lab
ME EN 5960 - 012 Microsensors Lab
- Class Number: 13296
- Instructor: NOH, MOSES SEUNGBEOM
- Instructor: SOLZBACHER, FLORIAN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 0
ME EN 5960 - 013 Microsensors Lab
ME EN 5960 - 013 Microsensors Lab
- Class Number: 13297
- Instructor: NOH, MOSES SEUNGBEOM
- Instructor: SOLZBACHER, FLORIAN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 0
ME EN 5960 - 014 Microsensors Lab
ME EN 5960 - 014 Microsensors Lab
- Class Number: 13298
- Instructor: NOH, MOSES SEUNGBEOM
- Instructor: SOLZBACHER, FLORIAN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 1
ME EN 6200 - 001 Classical Control Sys
ME EN 6200 - 001 Classical Control Sys
- Class Number: 1989
- Instructor: GRIEVE, THOMAS
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $40.00
- Seats Available: 6
ME EN 6205 - 001 System Dynamics
ME EN 6205 - 001 System Dynamics
- Class Number: 13265
- Instructor: MEEK, SANFORD
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 21
ME EN 6220 - 001 Robotics
ME EN 6220 - 001 Robotics
- Class Number: 2721
- Instructor: HOLLERBACH, JOHN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 21
ME EN 6240 - 001 Advanced Mechatronics
This course has required lab time outside of lecture. Labs will be held in MEB 2265 at a time to be determined on the first day of class. Students will be required to purchase electronics to complete each lab (~$35 per student total). Term project costs will vary. Please see http://mech.utah.edu/adv_mechatronics/index.php/Main/CourseDetails for details on the course and what you should do if the course becomes full.
ME EN 6240 - 001 Advanced Mechatronics
- Class Number: 12955
- Instructor: DOXON, ANDREW
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Fees: $95.00
- Seats Available: 0
This course has required lab time outside of lecture. Labs will be held in MEB 2265 at a time to be determined on the first day of class. Students will be required to purchase electronics to complete each lab (~$35 per student total). Term project costs will vary. Please see http://mech.utah.edu/adv_mechatronics/index.php/Main/CourseDetails for details on the course and what you should do if the course becomes full.
ME EN 6250 - 001 Programming for Engin
ME EN 6250 - 001 Programming for Engin
- Class Number: 13267
- Instructor: JOHNSON, DAVID
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 4
ME EN 6300 - 001 Adv. Strength
ME EN 6300 - 001 Adv. Strength
- Class Number: 1990
- Instructor: DEVRIES, LARRY
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 26
ME EN 6510 - 001 Finite Elements
ME EN 6510 - 001 Finite Elements
- Class Number: 1991
- Instructor: COATS, BRITTANY
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 3
ME EN 6600 - 001 Intermediate Thermo.
ME EN 6600 - 001 Intermediate Thermo.
- Class Number: 16266
- Instructor: CHEN, KUAN
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 11
ME EN 6620 - 001 Fund Microscale Eng
ME EN 6620 - 001 Fund Microscale Eng
- Class Number: 16268
- Instructor: SMITH, JAMES
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 16
ME EN 6700 - 001 Int Fluid Dynamics
ME EN 6700 - 001 Int Fluid Dynamics
- Class Number: 8171
- Instructor: PARDYJAK, ERIC
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $50.00
- Seats Available: 5
ME EN 6800 - 001 Sustainable Energy
ME EN 6800 - 001 Sustainable Energy
- Class Number: 14427
- Instructor: UDELL, KENT S
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 17
ME EN 6810 - 001 Thermal Sys Des
ME EN 6810 - 001 Thermal Sys Des
- Class Number: 16272
- Instructor: DILLON, M
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 5
ME EN 6950 - 001 Indep Study
Each faculty member is assigned a unique section of ME EN 6950. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6950 - 001 Indep Study
- Class Number: 3563
- Instructor: LEANG, KAM
- Component: Independent Study
- Type: In Person
- Units: 1.0 - 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 8
Each faculty member is assigned a unique section of ME EN 6950. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6955 - 001 Special Project
Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6955 - 001 Special Project
- Class Number: 4595
- Instructor: AMEEL, TIM
- Component: Special Projects
- Type: In Person
- Units: 1.0 - 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6960 - 001 Intermediate Heat Transfer
There is also a 2-hour lab, times TBA. Contact instructor for details.
ME EN 6960 - 001 Intermediate Heat Transfer
- Class Number: 16270
- Instructor: PARK, KEUNHAN
- Component: Special Topics
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 7
There is also a 2-hour lab, times TBA. Contact instructor for details.
ME EN 6960 - 002 Product & Indust Safety
ME EN 6960 - 002 Product & Indust Safety
- Class Number: 14424
- Instructor: DENTREMONT, KEN L
- Component: Special Topics
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 4
ME EN 6960 - 004 Advanced Manufacturing
Please contact the instructor to be placed on the registration list.
ME EN 6960 - 004 Advanced Manufacturing
- Class Number: 10784
- Instructor: SLOWIK, TOM S
- Component: Lecture
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 3
Please contact the instructor to be placed on the registration list.
ME EN 6960 - 005 Advanced Manufacturing
Please contact the instructor to be placed on the registration list.
ME EN 6960 - 005 Advanced Manufacturing
- Class Number: 10785
- Instructor: SLOWIK, TOM S
- Component: Lecture
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Fees: $25.00
- Seats Available: 2
Please contact the instructor to be placed on the registration list.
ME EN 6960 - 007 Wrtg and Comm for Grad Stdnts
ME EN 6960 - 007 Wrtg and Comm for Grad Stdnts
- Class Number: 15869
- Instructor: RISBUD, ADITI
- Component: Lecture
- Type: In Person
- Units: 2.0
- Requisites: Yes
- Wait List: No
- Seats Available: 4
ME EN 6960 - 010 Scanning Electron Microscopy
There is also a 2-hour lab, times TBA. Contact instructor for details.
ME EN 6960 - 010 Scanning Electron Microscopy
- Class Number: 17438
- Instructor: DELONG, MATTHEW
- Component: Lecture
- Type: In Person
- Units: 3.0 - 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 4
There is also a 2-hour lab, times TBA. Contact instructor for details.
ME EN 6960 - 011 Microsensors
Students must also register for the lab ME EN 6960 section 012, 013, or 014.
ME EN 6960 - 011 Microsensors
- Class Number:
- Instructor: SOLZBACHER, FLORIAN
- Component: Lecture
- Type: In Person
- Units: 4.0
- Requisites: Yes
- Wait List: No
- Seats Available: 0
Students must also register for the lab ME EN 6960 section 012, 013, or 014.
ME EN 6960 - 012 Microsensors Lab
ME EN 6960 - 012 Microsensors Lab
- Class Number: 11520
- Instructor: NOH, MOSES SEUNGBEOM
- Instructor: SOLZBACHER, FLORIAN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 0
ME EN 6960 - 013 Microsensors Lab
ME EN 6960 - 013 Microsensors Lab
- Class Number: 11555
- Instructor: NOH, MOSES SEUNGBEOM
- Instructor: SOLZBACHER, FLORIAN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 0
ME EN 6960 - 014 Microsensors Lab
ME EN 6960 - 014 Microsensors Lab
- Class Number: 11556
- Instructor: NOH, MOSES SEUNGBEOM
- Instructor: SOLZBACHER, FLORIAN
- Component: Laboratory
- Type: In Person
- Units: --
- Requisites: Yes
- Wait List: No
- Fees: $126.00
- Seats Available: 0
ME EN 6975 - 001 Masters Thesis
Each faculty member is assigned a unique section of ME EN 6975. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6975 - 001 Masters Thesis
- Class Number: 1992
- Instructor: AMEEL, TIM
- Component: Thesis Research
- Type: In Person
- Units: 1.0 - 12.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
Each faculty member is assigned a unique section of ME EN 6975. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6975 - 038 Masters Thesis
ME EN 6975 - 038 Masters Thesis
- Class Number: 17987
- Instructor: TAN, Wenda
- Component: Thesis Research
- Type: In Person
- Units: 1.0 - 12.0
- Requisites: Yes
- Wait List: No
- Seats Available: 10
ME EN 6980 - 001 Fac Consult, MS
Each faculty member is assigned a unique section of ME EN 6980. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 6980 - 001 Fac Consult, MS
- Class Number: 1993
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 6980. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 7200 - 001 Nonlinear Controls
ME EN 7200 - 001 Nonlinear Controls
- Class Number: 16259
- Instructor: MINOR, MARK ANDREW
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Fees: $20.00
- Seats Available: 20
ME EN 7500 - 001 Engr Mat'l Science
ME EN 7500 - 001 Engr Mat'l Science
- Class Number: 16260
- Instructor: DEVRIES, LARRY
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 31
ME EN 7670 - 001 Adv Radiation
ME EN 7670 - 001 Adv Radiation
- Class Number: 16261
- Instructor: FRANCOEUR, MATHIEU
- Component: Lecture
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 13
ME EN 7960 - 001 Robotics Seminar
ME EN 7960 - 001 Robotics Seminar
- Class Number: 6653
- Instructor: HOLLERBACH, JOHN
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Seats Available: 6
ME EN 7960 - 002 Graduate Fluid Mechanics Semin
ME EN 7960 - 002 Graduate Fluid Mechanics Semin
- Class Number: 14383
- Instructor: PARDYJAK, ERIC
- Component: Special Topics
- Type: In Person
- Units: 1.0
- Requisites: Yes
- Wait List: No
- Seats Available: 7
ME EN 7960 - 003 Large-Eddy Sim Turbulent Flows
ME EN 7960 - 003 Large-Eddy Sim Turbulent Flows
- Class Number: 17966
- Instructor: STOLL, ROB
- Component: Special Topics
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 4
ME EN 7970 - 001 PhD Dissertation
Each faculty member is assigned a unique section of ME EN 7970. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 7970 - 001 PhD Dissertation
- Class Number: 3582
- Instructor: AMEEL, TIM
- Component: Thesis Research
- Type: In Person
- Units: 1.0 - 12.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 7970. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 7980 - 001 Fac Consultation, PhD
Each faculty member is assigned a unique section of ME EN 7980. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 7980 - 001 Fac Consultation, PhD
- Class Number: 3601
- Instructor: AMEEL, TIM
- Component: Independent Study
- Type: In Person
- Units: 3.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 7980. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 7990 - 001 Cont Registration, PhD
Each faculty member is assigned a unique section of ME EN 7990. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.
ME EN 7990 - 001 Cont Registration, PhD
- Class Number: 1994
- Instructor: AMEEL, TIM
- Component: Continuing Registration
- Type: In Person
- Units: 0.0
- Requisites: Yes
- Wait List: No
- Seats Available: 1
Each faculty member is assigned a unique section of ME EN 7990. Please see your faculty advisor for the withheld class number for his/her section .You will then register by adding a class by class number.