Departmental Advisors
Undergraduate Studies Office
Debra Mascaro
MEK 1560 - 801-587-8479
Graduate Studies Office
Mark Fehlberg
MEK 1568 - 801-585-9293
Departmental Notes

For course descriptions and pre-requisite information click on the subject column next to the appropriate catalog number.

THIS DEPARTMENT ENFORCES UNDERGRADUATE PREREQUISITES. Please note that the registration system may not factor in transfer work when determining if prerequisites have been met. If you are unable to register for a course and think you have met the prerequisite(s), please contact an advisor from this department to inquire about obtaining a permission code. You may be administratively dropped from a course if the prerequisite has not been met.

ME EN 1000 - 001 Intro Desgn for Eng Sys


This course requires enrollment in a corresponding lab section. Open to all students enrolled in Calculus I or higher or who already have credit for Calculus I. Students must have full major status to enroll in any subsequent ME EN course.

ME EN 1000 - 001 Intro Desgn for Eng Sys

  • Class Number:
  • Instructor: METZGER, M
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $105.00
  • Seats Available: 1

This course requires enrollment in a corresponding lab section. Open to all students enrolled in Calculus I or higher or who already have credit for Calculus I. Students must have full major status to enroll in any subsequent ME EN course.

ME EN 1000 - 002 Intro Desgn for Eng Sys

ME EN 1000 - 002 Intro Desgn for Eng Sys

  • Class Number: 9653
  • Instructor: METZGER, M
  • Instructor: YIN, TONY
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $105.00
  • Seats Available: 0

ME EN 1000 - 003 Intro Desgn for Eng Sys

ME EN 1000 - 003 Intro Desgn for Eng Sys

  • Class Number: 9857
  • Instructor: METZGER, M
  • Instructor: YIN, TONY
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $105.00
  • Seats Available: 0

ME EN 1000 - 004 Intro Desgn for Eng Sys

ME EN 1000 - 004 Intro Desgn for Eng Sys

  • Class Number: 11164
  • Instructor: METZGER, M
  • Instructor: PISKADLO, ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $105.00
  • Seats Available: 0

ME EN 1000 - 005 Intro Desgn for Eng Sys

ME EN 1000 - 005 Intro Desgn for Eng Sys

  • Class Number: 16333
  • Instructor: METZGER, M
  • Instructor: PISKADLO, ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $105.00
  • Seats Available: 1

ME EN 1005 - 001 CAD Lab


This is a self-directed Canvas module but students can also choose to attend a ME EN 1000 lecture for the first 9 weeks of the semester (see ME EN 1000 lab schedule); talk to a ME EN 1005 instructor for more information. Students need to pass the CSWA Solidworks exam to pass this class.

ME EN 1005 - 001 CAD Lab

  • Class Number: 7077
  • Instructor: METZGER, M
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 7

This is a self-directed Canvas module but students can also choose to attend a ME EN 1000 lecture for the first 9 weeks of the semester (see ME EN 1000 lab schedule); talk to a ME EN 1005 instructor for more information. Students need to pass the CSWA Solidworks exam to pass this class.

ME EN 1010 - 001 Cmptr Prob Solv Eng Sys


This course requires enrollment in a corresponding lab section. Students must be admitted to Intermediate Mechanical or Intermediate Engineering major status in order to enroll in this course.

ME EN 1010 - 001 Cmptr Prob Solv Eng Sys

  • Class Number:
  • Instructor: MASCARO, DEBRA J
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $120.00
  • Seats Available: 1

This course requires enrollment in a corresponding lab section. Students must be admitted to Intermediate Mechanical or Intermediate Engineering major status in order to enroll in this course.

ME EN 1010 - 002 Cmptr Prob Solv Eng Sys

ME EN 1010 - 002 Cmptr Prob Solv Eng Sys

  • Class Number: 6940
  • Instructor: CHEN, FEI
  • Instructor: MASCARO, DEBRA J
  • Instructor: MITCHELL, ALEX F
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $120.00
  • Seats Available: 0

ME EN 1010 - 003 Cmptr Prob Solv Eng Sys

ME EN 1010 - 003 Cmptr Prob Solv Eng Sys

ME EN 1010 - 004 Cmptr Prob Solv Eng Sys

ME EN 1010 - 004 Cmptr Prob Solv Eng Sys

  • Class Number: 6945
  • Instructor: HASAN, MD NAHID
  • Instructor: LIU, YUNYA
  • Instructor: MASCARO, DEBRA J
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $120.00
  • Seats Available: 0

ME EN 1010 - 005 Cmptr Prob Solv Eng Sys

ME EN 1010 - 005 Cmptr Prob Solv Eng Sys

  • Class Number: 7262
  • Instructor: CHEN, FEI
  • Instructor: MASCARO, DEBRA J
  • Instructor: MITCHELL, ALEX F
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $120.00
  • Seats Available: 0

ME EN 1010 - 006 Cmptr Prob Solv Eng Sys

ME EN 1010 - 006 Cmptr Prob Solv Eng Sys

  • Class Number:
  • Instructor: OOI, YU KEE
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $120.00
  • Seats Available: 12

ME EN 1010 - 007 Cmptr Prob Solv Eng Sys

ME EN 1010 - 007 Cmptr Prob Solv Eng Sys

  • Class Number: 6944
  • Instructor: HASAN, MD NAHID
  • Instructor: OOI, YU KEE
  • Instructor: PAUL, SHARAT
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $120.00
  • Seats Available: 8

ME EN 1010 - 008 Cmptr Prob Solv Eng Sys

ME EN 1010 - 008 Cmptr Prob Solv Eng Sys

  • Class Number: 6943
  • Instructor: CHEN, FEI
  • Instructor: LIU, YUNYA
  • Instructor: OOI, YU KEE
  • Instructor: ZHAO, ZILONG
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $120.00
  • Seats Available: 1

ME EN 1010 - 009 Cmptr Prob Solv Eng Sys

ME EN 1010 - 009 Cmptr Prob Solv Eng Sys

  • Class Number: 6941
  • Instructor: HOTZ, ELISE
  • Instructor: OOI, YU KEE
  • Instructor: PAUL, SHARAT
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $120.00
  • Seats Available: 2

ME EN 1010 - 010 Cmptr Prob Solv Eng Sys

ME EN 1010 - 010 Cmptr Prob Solv Eng Sys

  • Class Number: 18196
  • Instructor: LIU, YUNYA
  • Instructor: OOI, YU KEE
  • Instructor: ZHAO, ZILONG
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $120.00
  • Seats Available: 1

ME EN 2010 - 001 Statics

ME EN 2010 - 001 Statics

  • Class Number:
  • Instructor: Acevedo, Claire
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $29.18
  • Seats Available: 8

ME EN 2010 - 002 Statics

ME EN 2010 - 002 Statics

  • Class Number: 12382
  • Instructor: Acevedo, Claire
  • Instructor: SPEAR, ASHLEY
  • Component: Discussion
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 2

ME EN 2010 - 003 Statics

ME EN 2010 - 003 Statics

ME EN 2010 - 004 Statics

ME EN 2010 - 004 Statics

ME EN 2010 - 005 Statics

ME EN 2010 - 005 Statics

  • Class Number:
  • Instructor: SPEAR, ASHLEY
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $29.18
  • Seats Available: 14

ME EN 2010 - 006 Statics

ME EN 2010 - 006 Statics

  • Class Number: 14946
  • Instructor: Acevedo, Claire
  • Instructor: SPEAR, ASHLEY
  • Component: Discussion
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 5

ME EN 2010 - 007 Statics

ME EN 2010 - 007 Statics

ME EN 2010 - 008 Statics

ME EN 2010 - 008 Statics

ME EN 2030 - 001 Dynamics

ME EN 2030 - 001 Dynamics

  • Class Number: 1200
  • Instructor: MONSON, KEN L
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 33

ME EN 2300 - 001 Thermodynamics

ME EN 2300 - 001 Thermodynamics

  • Class Number: 18192
  • Instructor: UDELL, KENT S
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 34

ME EN 2300 - 002 Thermodynamics

ME EN 2300 - 002 Thermodynamics

  • Class Number: 18193
  • Instructor: PARK, KEUNHAN
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $41.20
  • Seats Available: 10

ME EN 2450 - 001 Num Methods for Eng Sys


This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 2450 - 001 Num Methods for Eng Sys

  • Class Number:
  • Instructor: HOCHHALTER, Jacob
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $45.90
  • Seats Available: 38

This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 2450 - 002 Num Methods for Eng Sys

ME EN 2450 - 002 Num Methods for Eng Sys

  • Class Number: 11505
  • Instructor: HOCHHALTER, Jacob
  • Instructor: STRAUSS, NOLAN C
  • Component: Laboratory
  • Type: IVC
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 8

ME EN 2450 - 003 Num Methods for Eng Sys

ME EN 2450 - 003 Num Methods for Eng Sys

  • Class Number: 8936
  • Instructor: HOCHHALTER, Jacob
  • Instructor: JAMIL, FAISAL
  • Component: Laboratory
  • Type: IVC
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 4

ME EN 2450 - 004 Num Methods for Eng Sys

ME EN 2450 - 004 Num Methods for Eng Sys

  • Class Number: 10356
  • Instructor: HOCHHALTER, Jacob
  • Instructor: STRAUSS, NOLAN C
  • Component: Laboratory
  • Type: IVC
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 6

ME EN 2550 - 001 Prob & Stats for Eng

ME EN 2550 - 001 Prob & Stats for Eng

  • Class Number: 10875
  • Instructor: Roundy, Shad
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 23

ME EN 2650 - 001 Manufact for Eng Sys


This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 2650 - 001 Manufact for Eng Sys

  • Class Number:
  • Instructor: BALAJI, A.K.
  • Instructor: ZHAO, BO
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 14

This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 2650 - 003 Manufact for Eng Sys


Lab will involve watching online demonstration videos. Times will be arranged with the instructor to visit the machine shop.

ME EN 2650 - 003 Manufact for Eng Sys

  • Class Number: 9522
  • Instructor: BALAJI, A.K.
  • Component: Laboratory
  • Type: Online
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 0

Lab will involve watching online demonstration videos. Times will be arranged with the instructor to visit the machine shop.

ME EN 2650 - 004 Manufact for Eng Sys


Lab will involve watching online demonstration videos. Times will be arranged with the instructor to visit the machine shop.

ME EN 2650 - 004 Manufact for Eng Sys

  • Class Number: 9523
  • Instructor: BALAJI, A.K.
  • Component: Laboratory
  • Type: Online
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 8

Lab will involve watching online demonstration videos. Times will be arranged with the instructor to visit the machine shop.

ME EN 2650 - 006 Manufact for Eng Sys


Lab will involve watching online demonstration videos. Times will be arranged with the instructor to visit the machine shop.

ME EN 2650 - 006 Manufact for Eng Sys

  • Class Number: 9524
  • Instructor: BALAJI, A.K.
  • Component: Laboratory
  • Type: Online
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 8

Lab will involve watching online demonstration videos. Times will be arranged with the instructor to visit the machine shop.

ME EN 2650 - 007 Manufact for Eng Sys


Lab will involve watching online demonstration videos. Times will be arranged with the instructor to visit the machine shop.

ME EN 2650 - 007 Manufact for Eng Sys

  • Class Number: 9525
  • Instructor: BALAJI, A.K.
  • Component: Laboratory
  • Type: Online
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 3

Lab will involve watching online demonstration videos. Times will be arranged with the instructor to visit the machine shop.

ME EN 2800 - 001 Academic Skills for ME


Section 001 meets the whole semester and goes more in-depth into course topics. Section 002 meets the first half of the semester only and covers fewer topics and less in-depth.

ME EN 2800 - 001 Academic Skills for ME

  • Class Number: 18203
  • Instructor: PETRIE, BENJAMIN
  • Component: Seminar
  • Type: In Person
  • Units: 1.0
  • Wait List: Yes
  • Seats Available: 7

Section 001 meets the whole semester and goes more in-depth into course topics. Section 002 meets the first half of the semester only and covers fewer topics and less in-depth.

ME EN 2800 - 002 Academic Skills for ME


Section 002 meets the first half of the semester only. If you prefer to cover topics more in depth, section 001 meets for the whole semester.

ME EN 2800 - 002 Academic Skills for ME

  • Class Number: 18204
  • Instructor: PETRIE, BENJAMIN
  • Component: Seminar
  • Type: In Person
  • Units: 0.5
  • Wait List: Yes
  • Seats Available: 10

Section 002 meets the first half of the semester only. If you prefer to cover topics more in depth, section 001 meets for the whole semester.

ME EN 2800 - 004 Academic Skills for ME

ME EN 2800 - 004 Academic Skills for ME

  • Class Number: 20330
  • Instructor: PETRIE, BENJAMIN
  • Component: Seminar
  • Type: In Person
  • Units: 0.5
  • Wait List: Yes
  • Seats Available: 37

ME EN 2960 - 001 Foundations of Microsystems


This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place.

ME EN 2960 - 001 Foundations of Microsystems

  • Class Number: 7933
  • Instructor: GALE, BRUCE
  • Component: Special Topics
  • Type: In Person
  • Units: 1.0
  • Wait List: Yes
  • Fees: $85.00
  • Seats Available: 2

This class is open to any student interested in microfabrication technologies. Seating preference will be given to engineering students. Take this course if you want to have fun and be reminded why you wanted to be an engineer in the first place.

ME EN 2960 - 002 Foundations of Microsystems

ME EN 2960 - 002 Foundations of Microsystems

  • Class Number: 18194
  • Instructor: GALE, BRUCE
  • Component: Special Topics
  • Type: In Person
  • Units: 1.0
  • Wait List: Yes
  • Fees: $85.00
  • Seats Available: 2

ME EN 3000 - 001 Design of Mech Elements

ME EN 3000 - 001 Design of Mech Elements

  • Class Number: 7938
  • Instructor: RAEYMAEKERS, BART
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 69

ME EN 3220 - 001 Dynamic Sys & Control

ME EN 3220 - 001 Dynamic Sys & Control

  • Class Number: 10868
  • Instructor: ZHANG, HAOHAN
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $57.65
  • Seats Available: 17

ME EN 3230 - 001 Mechatronics


This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 3230 - 001 Mechatronics

  • Class Number:
  • Instructor: MINOR, MARK ANDREW
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $275.00
  • Seats Available: 16

This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 3230 - 002 Mechatronics

ME EN 3230 - 002 Mechatronics

ME EN 3230 - 003 Mechatronics

ME EN 3230 - 003 Mechatronics

ME EN 3230 - 004 Mechatronics

ME EN 3230 - 004 Mechatronics

  • Class Number: 12144
  • Instructor: BAUM, BRANDON
  • Instructor: DAVIS, JACE
  • Instructor: MINOR, MARK ANDREW
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $275.00
  • Seats Available: 0

ME EN 3230 - 005 Mechatronics


This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 3230 - 005 Mechatronics

  • Class Number:
  • Instructor: BATTAGLIA, EDOARDO
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $275.00
  • Seats Available: 19

This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 3230 - 006 Mechatronics

ME EN 3230 - 006 Mechatronics

ME EN 3230 - 007 Mechatronics

ME EN 3230 - 007 Mechatronics

ME EN 3230 - 008 Mechatronics

ME EN 3230 - 008 Mechatronics

  • Class Number: 12145
  • Instructor: BATTAGLIA, EDOARDO
  • Instructor: POSSELLI, NICK
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $275.00
  • Seats Available: 1

ME EN 3310 - 001 Mechanics of Materials

ME EN 3310 - 001 Mechanics of Materials

  • Class Number: 14938
  • Instructor: NEWELL, PANIA
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $29.18
  • Seats Available: 4

ME EN 3315 - 001 Mech of Materials Lab

ME EN 3315 - 001 Mech of Materials Lab

  • Class Number: 14939
  • Instructor: METCALF, MITCH M
  • Instructor: NEWELL, PANIA
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $75.00
  • Seats Available: 2

ME EN 3315 - 002 Mech of Materials Lab

ME EN 3315 - 002 Mech of Materials Lab

  • Class Number: 14940
  • Instructor: NEWELL, PANIA
  • Instructor: SNOW, TANNER
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $75.00
  • Seats Available: 0

ME EN 3315 - 003 Mech of Materials Lab

ME EN 3315 - 003 Mech of Materials Lab

  • Class Number: 14941
  • Instructor: NEWELL, PANIA
  • Instructor: SNOW, TANNER
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $75.00
  • Seats Available: 1

ME EN 3315 - 004 Mech of Materials Lab

ME EN 3315 - 004 Mech of Materials Lab

  • Class Number: 14942
  • Instructor: METCALF, MITCH M
  • Instructor: NEWELL, PANIA
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $75.00
  • Seats Available: 0

ME EN 3315 - 006 Mech of Materials Lab

ME EN 3315 - 006 Mech of Materials Lab

  • Class Number: 14943
  • Instructor: AL NADABI, AL MUATASIM
  • Instructor: NEWELL, PANIA
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $75.00
  • Seats Available: 1

ME EN 3315 - 007 Mech of Materials Lab

ME EN 3315 - 007 Mech of Materials Lab

  • Class Number: 14944
  • Instructor: AL NADABI, AL MUATASIM
  • Instructor: NEWELL, PANIA
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $75.00
  • Seats Available: 0

ME EN 3400 - 002 Prof Comm for MEs

ME EN 3400 - 002 Prof Comm for MEs

  • Class Number: 18199
  • Instructor: BOOTH, AUSTIN
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $29.22
  • Seats Available: 0

ME EN 3400 - 003 Prof Comm for MEs

ME EN 3400 - 003 Prof Comm for MEs

  • Class Number: 13179
  • Instructor: BOOTH, AUSTIN
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $29.22
  • Seats Available: 7

ME EN 3400 - 090 Prof Comm for MEs


This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/

ME EN 3400 - 090 Prof Comm for MEs

  • Class Number: 10885
  • Instructor: ASKREN, RUSS
  • Component: Lecture
  • Type: Online
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $60.00
  • Seats Available: 15

This is an online course, which does not have a specific meeting time or location throughout the semester. For additional information, please visit https://online.utah.edu/about-online-learning/

ME EN 3650 - 001 Heat Transfer

ME EN 3650 - 001 Heat Transfer

  • Class Number: 18209
  • Instructor: FRANCOEUR, MATHIEU
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $42.35
  • Seats Available: 6

ME EN 3710 - 001 Fluid Mechanics

ME EN 3710 - 001 Fluid Mechanics

  • Class Number: 12137
  • Instructor: PARDYJAK, ERIC
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 2

ME EN 3950 - 001 Indep Study

ME EN 3950 - 001 Indep Study

  • Class Number: 7860
  • Instructor: GALE, BRUCE
  • Component: Independent Study
  • Type: In Person
  • Units: 1.0 - 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

ME EN 4000 - 001 Engineering Design I

ME EN 4000 - 001 Engineering Design I

  • Class Number: 9270
  • Instructor: Kong, Yong
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $75.00
  • Seats Available: 6

ME EN 4010 - 001 Engineering Design II

ME EN 4010 - 001 Engineering Design II

  • Class Number: 2000
  • Instructor: WARREN, ROSEANNE
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $75.00
  • Seats Available: 5

ME EN 4650 - 001 TFES Lab

ME EN 4650 - 001 TFES Lab

  • Class Number:
  • Instructor: METZGER, M
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $175.00
  • Seats Available: 31

ME EN 4650 - 002 TFES Lab

ME EN 4650 - 002 TFES Lab

  • Class Number: 12336
  • Instructor: METZGER, M
  • Instructor: TIWARI, JANAK
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $175.00
  • Seats Available: 0

ME EN 4650 - 003 TFES Lab

ME EN 4650 - 003 TFES Lab

  • Class Number: 12337
  • Instructor: CSONTOS, BENCE
  • Instructor: METZGER, M
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $175.00
  • Seats Available: 0

ME EN 4650 - 004 TFES Lab

ME EN 4650 - 004 TFES Lab

  • Class Number: 12338
  • Instructor: GHAEMI, ZAHRA
  • Instructor: METZGER, M
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $175.00
  • Seats Available: 0

ME EN 4650 - 006 TFES Lab

ME EN 4650 - 006 TFES Lab

  • Class Number: 12340
  • Instructor: CSONTOS, BENCE
  • Instructor: METZGER, M
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $175.00
  • Seats Available: 0

ME EN 4650 - 008 TFES Lab

ME EN 4650 - 008 TFES Lab

  • Class Number: 12342
  • Instructor: METZGER, M
  • Instructor: TIWARI, JANAK
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $175.00
  • Seats Available: 0

ME EN 4650 - 011 TFES Lab

ME EN 4650 - 011 TFES Lab

  • Class Number: 14989
  • Instructor: METZGER, M
  • Instructor: TIWARI, JANAK
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $175.00
  • Seats Available: 1

ME EN 4650 - 012 TFES Lab

ME EN 4650 - 012 TFES Lab

  • Class Number: 12344
  • Instructor: CSONTOS, BENCE
  • Instructor: METZGER, M
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $175.00
  • Seats Available: -1

ME EN 4650 - 013 TFES Lab

ME EN 4650 - 013 TFES Lab

  • Class Number: 14990
  • Instructor: GHAEMI, ZAHRA
  • Instructor: METZGER, M
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $175.00
  • Seats Available: -1

ME EN 4650 - 015 TFES Lab

ME EN 4650 - 015 TFES Lab

  • Class Number: 18201
  • Instructor: GHAEMI, ZAHRA
  • Instructor: METZGER, M
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $175.00
  • Seats Available: 0

ME EN 4650 - 016 TFES Lab

ME EN 4650 - 016 TFES Lab

  • Class Number: 18202
  • Instructor: METZGER, M
  • Instructor: TIWARI, JANAK
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $175.00
  • Seats Available: 0

ME EN 4999 - 001 Honors Thesis/Project

ME EN 4999 - 001 Honors Thesis/Project

  • Class Number: 1420
  • Instructor: SPEAR, ASHLEY
  • Component: Honors Thesis Project
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 7

ME EN 5010 - 001 Manufacturing Process

ME EN 5010 - 001 Manufacturing Process

  • Class Number: 14950
  • Instructor: BALAJI, A.K.
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 10

ME EN 5035 - 001 Design of Experiments

ME EN 5035 - 001 Design of Experiments

  • Class Number: 12241
  • Instructor: FEHLBERG, MARK
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 10

ME EN 5050 - 001 Micromachining


Sections 2-3 belong to this lecture. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.

ME EN 5050 - 001 Micromachining

  • Class Number:
  • Instructor: REICHE, CHRISTOPHER F
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $150.00
  • Seats Available: 24

Sections 2-3 belong to this lecture. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.

ME EN 5050 - 002 Micromachining

ME EN 5050 - 002 Micromachining

ME EN 5053 - 001 Micro Actuators


Section 2 belongs to this lecture section. This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 5053 - 001 Micro Actuators

  • Class Number:
  • Instructor: KIM, HANSEUP
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $128.00
  • Seats Available: 2

Section 2 belongs to this lecture section. This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 5053 - 002 Micro Actuators

ME EN 5053 - 002 Micro Actuators

  • Class Number: 13637
  • Instructor: JUTHI, SHAMIMA
  • Instructor: KIM, HANSEUP
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $128.00
  • Seats Available: 2

ME EN 5055 - 001 Microsystems Des & Char

ME EN 5055 - 001 Microsystems Des & Char

  • Class Number: 9271
  • Instructor: KIM, JAY
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $128.00
  • Seats Available: 14

ME EN 5110 - 001 Industrial Safety

ME EN 5110 - 001 Industrial Safety

  • Class Number: 14951
  • Instructor: DENTREMONT, KEN L
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 39

ME EN 5160 - 001 Fund of Systems Eng

ME EN 5160 - 001 Fund of Systems Eng

  • Class Number: 18629
  • Instructor: HUEBNER DOS REIS, PEDRO
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 15

ME EN 5165 - 001 Requirements Eng & Mgmt

ME EN 5165 - 001 Requirements Eng & Mgmt

  • Class Number: 18632
  • Instructor: HUEBNER DOS REIS, PEDRO
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 11

ME EN 5170 - 001 Systems Integration

ME EN 5170 - 001 Systems Integration

  • Class Number: 19753
  • Instructor: EASTON, TODD
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 7

ME EN 5210 - 001 State Space Control

ME EN 5210 - 001 State Space Control

  • Class Number: 3424
  • Instructor: MEEK, SANFORD
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $40.00
  • Seats Available: 14

ME EN 5230 - 001 Intro to Robot Control

ME EN 5230 - 001 Intro to Robot Control

  • Class Number: 7243
  • Instructor: MASCARO, STEPHEN A
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $40.00
  • Seats Available: 16

ME EN 5300 - 001 Adv Mech of Materials

ME EN 5300 - 001 Adv Mech of Materials

  • Class Number: 18211
  • Instructor: COATS, BRITTANY
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 38

ME EN 5410 - 001 Intrm. Dynamics

ME EN 5410 - 001 Intrm. Dynamics

  • Class Number: 14952
  • Instructor: Parker, Robert G
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 26

ME EN 5520 - 001 Composite Mat'ls

ME EN 5520 - 001 Composite Mat'ls

  • Class Number: 2001
  • Instructor: CZABAJ, Michael
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 34

ME EN 5540 - 001 Biomechanics II

ME EN 5540 - 001 Biomechanics II

  • Class Number: 8474
  • Instructor: WEISS, JEFFREY
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 7

ME EN 5600 - 001 Intermediate Thermo.

ME EN 5600 - 001 Intermediate Thermo.

  • Class Number: 12148
  • Instructor: AMEEL, TIM
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $41.20
  • Seats Available: 4

ME EN 5710 - 001 Aerodynamics

ME EN 5710 - 001 Aerodynamics

  • Class Number: 18212
  • Instructor: Fu, Henry
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $45.90
  • Seats Available: 3

ME EN 5820 - 001 HVAC

  • Class Number: 14985
  • Instructor: GWILLIAM, SCOTT
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 35

First semester of part-time co-op credit. See http://forms.mech.utah.edu/forms-current-student/me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.

ME EN 5910 - 001 Co-Op

  • Class Number: 8219
  • Instructor: MASCARO, DEBRA J
  • Component: Clinical
  • Type: In Person
  • Units: 1.5
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 13

First semester of part-time co-op credit. See http://forms.mech.utah.edu/forms-current-student/me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.

Second semester of part-time co-op credit. See http://forms.mech.utah.edu/forms-current-student-me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.

ME EN 5910 - 002 Co-Op

  • Class Number: 9273
  • Instructor: MASCARO, DEBRA J
  • Component: Clinical
  • Type: In Person
  • Units: 1.5
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 12

Second semester of part-time co-op credit. See http://forms.mech.utah.edu/forms-current-student-me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.

Full-time co-op credit. See http://forms.mech.utah.edu/forms-current-student-me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.

ME EN 5910 - 003 Co-Op

  • Class Number: 9274
  • Instructor: MASCARO, DEBRA J
  • Component: Clinical
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 9

Full-time co-op credit. See http://forms.mech.utah.edu/forms-current-student-me-en-5910-co-op-application/ for more information and to apply for permission to enroll in ME EN 5910.

ME EN 5930 - 001 Undergrad Research

ME EN 5930 - 001 Undergrad Research

  • Class Number: 1423
  • Instructor: GALE, BRUCE
  • Component: Independent Study
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

ME EN 5950 - 001 Independent Study

ME EN 5950 - 001 Independent Study

  • Class Number: 2455
  • Instructor: GALE, BRUCE
  • Component: Independent Study
  • Type: In Person
  • Units: 1.0 - 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

ME EN 5960 - 001 Engineering Analytics


Description: This course provides a broad overview of analytics in engineering disciplines. Students will learn to program in python to read, visualize, analyze and interpret data to improve systems and identify trends. The topics covered include: arrays, loops, data structures, graphing data, hypothesis testing, multiple regression, and simple heuristics such as hill climbing and simulated annealing. Prerequisite: One semester of computer programming: Typical courses include, but are not limited to, CS1400, CS 1420, ME EN 1010, MSE 2100 And One semester of probability or statistics. Typical courses include, but are not limited to, ME EN 2550, CS3130, ECE3530, or MATH 3070

ME EN 5960 - 001 Engineering Analytics

  • Class Number: 18215
  • Instructor: EASTON, TODD
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 11

Description: This course provides a broad overview of analytics in engineering disciplines. Students will learn to program in python to read, visualize, analyze and interpret data to improve systems and identify trends. The topics covered include: arrays, loops, data structures, graphing data, hypothesis testing, multiple regression, and simple heuristics such as hill climbing and simulated annealing. Prerequisite: One semester of computer programming: Typical courses include, but are not limited to, CS1400, CS 1420, ME EN 1010, MSE 2100 And One semester of probability or statistics. Typical courses include, but are not limited to, ME EN 2550, CS3130, ECE3530, or MATH 3070

ME EN 6010 - 001 Manufacturing Process

ME EN 6010 - 001 Manufacturing Process

  • Class Number: 14954
  • Instructor: BALAJI, A.K.
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 4

ME EN 6035 - 001 Design of Experiments

ME EN 6035 - 001 Design of Experiments

  • Class Number: 12242
  • Instructor: FEHLBERG, MARK
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Wait List: Yes
  • Seats Available: 7

ME EN 6050 - 001 Micromachining


Section 2 belongs to this lab. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.

ME EN 6050 - 001 Micromachining

  • Class Number:
  • Instructor: REICHE, CHRISTOPHER F
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $150.00
  • Seats Available: 8

Section 2 belongs to this lab. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.

ME EN 6050 - 002 Micromachining

ME EN 6050 - 002 Micromachining

ME EN 6053 - 001 Micro Actuators


Section 2 belongs to this lecture section. This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 6053 - 001 Micro Actuators

  • Class Number:
  • Instructor: KIM, HANSEUP
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $126.00
  • Seats Available: 3

Section 2 belongs to this lecture section. This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 6053 - 002 Micro Actuators

ME EN 6053 - 002 Micro Actuators

  • Class Number: 13687
  • Instructor: JUTHI, SHAMIMA
  • Instructor: KIM, HANSEUP
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $126.00
  • Seats Available: 3

ME EN 6055 - 001 Microsystems Des & Char

ME EN 6055 - 001 Microsystems Des & Char

  • Class Number: 9272
  • Instructor: KIM, JAY
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $128.00
  • Seats Available: 3

ME EN 6110 - 001 Industrial Safety

ME EN 6110 - 001 Industrial Safety

  • Class Number: 14955
  • Instructor: DENTREMONT, KEN L
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 6

ME EN 6140 - 001 Occupat Health & Safety


This class meets in the Rocky Mountain Center for Occupational and Environmental Health.

ME EN 6140 - 001 Occupat Health & Safety

  • Class Number: 7383
  • Instructor: DENTREMONT, KEN L
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $150.00
  • Seats Available: 0

This class meets in the Rocky Mountain Center for Occupational and Environmental Health.

ME EN 6160 - 001 Fund of Systems Eng

ME EN 6160 - 001 Fund of Systems Eng

  • Class Number: 18630
  • Instructor: HUEBNER DOS REIS, PEDRO
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Wait List: Yes
  • Seats Available: 21

ME EN 6165 - 001 Requirements Eng & Mgmt

ME EN 6165 - 001 Requirements Eng & Mgmt

  • Class Number: 18633
  • Instructor: HUEBNER DOS REIS, PEDRO
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Wait List: Yes
  • Seats Available: 4

ME EN 6170 - 001 Systems Integration

ME EN 6170 - 001 Systems Integration

  • Class Number: 19752
  • Instructor: EASTON, TODD
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Wait List: Yes
  • Seats Available: 12

ME EN 6210 - 001 State Space Control

ME EN 6210 - 001 State Space Control

  • Class Number: 3425
  • Instructor: MEEK, SANFORD
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 7

ME EN 6230 - 001 Intro to Robot Control

ME EN 6230 - 001 Intro to Robot Control

  • Class Number: 7244
  • Instructor: MASCARO, STEPHEN A
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 17

ME EN 6240 - 001 Advanced Mechatronics


There will be no undergraduate section this semester as it is an advanced course. Undergraduates can request a permission code from the instructor if you wish to take this course.

ME EN 6240 - 001 Advanced Mechatronics

  • Class Number: 13176
  • Instructor: LENZI, TOMMASO
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $95.00
  • Seats Available: 0

There will be no undergraduate section this semester as it is an advanced course. Undergraduates can request a permission code from the instructor if you wish to take this course.

ME EN 6300 - 001 Adv Mech of Materials

ME EN 6300 - 001 Adv Mech of Materials

  • Class Number: 18217
  • Instructor: COATS, BRITTANY
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 4

ME EN 6410 - 001 Intermediate Dynamics

ME EN 6410 - 001 Intermediate Dynamics

  • Class Number: 14984
  • Instructor: Parker, Robert G
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 15

ME EN 6520 - 001 Composite Mat'ls

ME EN 6520 - 001 Composite Mat'ls

  • Class Number: 2002
  • Instructor: CZABAJ, Michael
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 16

ME EN 6540 - 001 Biomechanics II

ME EN 6540 - 001 Biomechanics II

  • Class Number: 8938
  • Instructor: WEISS, JEFFREY
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Seats Available: 8

ME EN 6550 - 001 Exper Method Solid Mech


Contact instructor for permission code.

ME EN 6550 - 001 Exper Method Solid Mech

  • Class Number: 18206
  • Instructor: KINGSTEDT, OWEN
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Wait List: Yes
  • Seats Available: 3

Contact instructor for permission code.

ME EN 6600 - 001 Intermediate Thermo.

ME EN 6600 - 001 Intermediate Thermo.

  • Class Number: 12149
  • Instructor: AMEEL, TIM
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $41.20
  • Seats Available: 4

ME EN 6710 - 001 Aerodynamics

ME EN 6710 - 001 Aerodynamics

  • Class Number: 18218
  • Instructor: Fu, Henry
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: Yes
  • Fees: $45.90
  • Seats Available: 13