Attention: Classroom assignments may change between the time you
register and when classes begin. Please check your class schedule for the latest classroom location
information before attending class.
LLCFT 186 - 001 Stained Glass w/ Copper Foil
Students must purchase some of their own supplies and can expect to spend around $155; find a list online. Due to extensive group material purchasing, the deadline for dropping this course and receiving your Special Fee refunded is February 6th, 2024. This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Please wear closed-toe shoes. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Special fee is for shared classroom materials.
LLCFT 186 - 001 Stained Glass w/ Copper Foil
- Class Number: 13930
- Instructor: FOSTER, TARA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $345.00
- Seats Available: 0
Students must purchase some of their own supplies and can expect to spend around $155; find a list online. Due to extensive group material purchasing, the deadline for dropping this course and receiving your Special Fee refunded is February 6th, 2024. This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Please wear closed-toe shoes. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Special fee is for shared classroom materials.
LLCFT 229 - 001 Metalsmithing I
No class 2/6. Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and some supplies.
LLCFT 229 - 001 Metalsmithing I
- Class Number: 12900
- Instructor: SCHMIDT, AMY
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $254.00
- Seats Available: 1
No class 2/6. Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and some supplies.
LLCFT 229 - 003 Metalsmithing I
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and some supplies.
LLCFT 229 - 003 Metalsmithing I
- Class Number: 16524
- Instructor: HARRIS-SMITH, JAN
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $254.00
- Seats Available: 0
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and some supplies.
LLCFT 229 - 004 Metalsmithing I
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and some supplies.
LLCFT 229 - 004 Metalsmithing I
- Class Number: 21045
- Instructor: HARRIS-SMITH, JAN
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $254.00
- Seats Available: 1
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and some supplies.
LLCFT 234 - 001 Welding: An Introduction
Class meets at 8415 S 700 W, #15, Sandy. Special fee is for all needed materials for assigned class projects and studio rental. Additional materials may be purchased for personal projects.
LLCFT 234 - 001 Welding: An Introduction
- Class Number: 13884
- Instructor: COBBLEY, RICHARD
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $485.00
- Seats Available: 0
Class meets at 8415 S 700 W, #15, Sandy. Special fee is for all needed materials for assigned class projects and studio rental. Additional materials may be purchased for personal projects.
LLCFT 234 - 002 Welding: An Introduction
Class meets at 8415 S 700 W, #15, Sandy. Special fee is for all needed materials for assigned class projects and studio rental. Additional materials may be purchased for personal projects.
LLCFT 234 - 002 Welding: An Introduction
- Class Number: 13885
- Instructor: COBBLEY, RICHARD
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $485.00
- Seats Available: 0
Class meets at 8415 S 700 W, #15, Sandy. Special fee is for all needed materials for assigned class projects and studio rental. Additional materials may be purchased for personal projects.
LLCFT 234 - 003 Welding: An Introduction
Class meets at 8415 S 700 W, #15, Sandy. Special fee is for all needed materials for assigned class projects and studio rental. Additional materials may be purchased for personal projects.
LLCFT 234 - 003 Welding: An Introduction
- Class Number: 13886
- Instructor: COBBLEY, RICHARD
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $485.00
- Seats Available: 0
Class meets at 8415 S 700 W, #15, Sandy. Special fee is for all needed materials for assigned class projects and studio rental. Additional materials may be purchased for personal projects.
LLCFT 234 - 004 Welding: An Introduction
Class meets at 8415 S 700 W, #15, Sandy. Special fee is for all needed materials for assigned class projects and studio rental. Additional materials may be purchased for personal projects.
LLCFT 234 - 004 Welding: An Introduction
- Class Number: 13887
- Instructor: COBBLEY, RICHARD
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $485.00
- Seats Available: 0
Class meets at 8415 S 700 W, #15, Sandy. Special fee is for all needed materials for assigned class projects and studio rental. Additional materials may be purchased for personal projects.
LLCFT 267 - 002 Beginning Sewing I
No class 2/19. **MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.** Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Students provide their own sewing machine and most of their own supplies; find a list online. Special fee is for shared supplies and studio rental. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class.
LLCFT 267 - 002 Beginning Sewing I
- Class Number: 19117
- Instructor: MCCAUSLAND, ANDREA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $269.00
- Seats Available: 0
No class 2/19. **MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.** Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Students provide their own sewing machine and most of their own supplies; find a list online. Special fee is for shared supplies and studio rental. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class.
LLCFT 341 - 001 Alterations and Repairs
This class takes place in person at One Sandy Center (10011 Centennial Parkway, Sandy). Students provide their own sewing machine and their own materials; find the list online. A catalog the instructor recommends for obtaining materials can be found online at https://www.wawak.com/catalogrequest/ We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Class is limited to 8.
LLCFT 341 - 001 Alterations and Repairs
- Class Number: 12899
- Instructor: GRAHAM, TRACY
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $175.00
- Seats Available: 0
This class takes place in person at One Sandy Center (10011 Centennial Parkway, Sandy). Students provide their own sewing machine and their own materials; find the list online. A catalog the instructor recommends for obtaining materials can be found online at https://www.wawak.com/catalogrequest/ We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. Class is limited to 8.
LLCFT 353 - 001 Metalsmithing II
No class 4/2. Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and some supplies.**Prerequisite: LLCFT 229 Metalsmithing I or take our quiz to self-assess your skill level.**
LLCFT 353 - 001 Metalsmithing II
- Class Number: 13878
- Instructor: SCHMIDT, AMY
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $254.00
- Seats Available: 0
No class 4/2. Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and some supplies.**Prerequisite: LLCFT 229 Metalsmithing I or take our quiz to self-assess your skill level.**
LLCFT 353 - 002 Metalsmithing II
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and some supplies; students will purchase more supplies in class or order online with assistance from the instructor. **Prerequisite: LLCFT 229 Metalsmithing I or take our quiz to self-assess your skill level.**
LLCFT 353 - 002 Metalsmithing II
- Class Number: 16929
- Instructor: HARRIS-SMITH, JAN
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $302.00
- Seats Available: 0
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and some supplies; students will purchase more supplies in class or order online with assistance from the instructor. **Prerequisite: LLCFT 229 Metalsmithing I or take our quiz to self-assess your skill level.**
LLCFT 359 - 001 Beginning Woodworking
**MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.** Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Special fee is for all needed equipment and shop rental. Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable.
LLCFT 359 - 001 Beginning Woodworking
- Class Number: 13944
- Instructor: HARMAN, JONATHAN
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $359.00
- Seats Available: 1
**MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.** Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Special fee is for all needed equipment and shop rental. Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable.
LLCFT 359 - 002 Beginning Woodworking
**MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.** Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Special fee is for all needed equipment and shop rental. Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable.
LLCFT 359 - 002 Beginning Woodworking
- Class Number: 13945
- Instructor: HARMAN, JONATHAN
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $359.00
- Seats Available: 0
**MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.** Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Special fee is for all needed equipment and shop rental. Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable.
LLCFT 362 - 001 Beginning Knitting
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC).Please wait until after the first class to purchase yarn. Students provide their own yarn after the first class session. Special fee is for all other needed supplies including knitting needles. Students should expect to do 1-3 hours of knitting per week at home to keep up with coursework.
LLCFT 362 - 001 Beginning Knitting
- Class Number: 16076
- Instructor: HARGREAVES-JUDZIS, AMY
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $169.00
- Seats Available: 0
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC).Please wait until after the first class to purchase yarn. Students provide their own yarn after the first class session. Special fee is for all other needed supplies including knitting needles. Students should expect to do 1-3 hours of knitting per week at home to keep up with coursework.
LLCFT 367 - 001 Lost Wax Casting for Jewelry
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and some supplies; students will purchase more supplies during class and can expect to spend around $40.
LLCFT 367 - 001 Lost Wax Casting for Jewelry
- Class Number: 16077
- Instructor: HARRIS-SMITH, JAN
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $329.00
- Seats Available: 0
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and some supplies; students will purchase more supplies during class and can expect to spend around $40.
LLCFT 371 - 001 Wheel-Thrown Ceramics: Bowls
Class meets at Workshop SLC (153 2100 S, South Salt Lake). Special fee is for studio rental and all needed materials.
LLCFT 371 - 001 Wheel-Thrown Ceramics: Bowls
LLCFT 374 - 001 Bookbinding
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students provide some of their own materials; find the list online. Special fee is for shared classroom materials. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class.
LLCFT 374 - 001 Bookbinding
- Class Number: 19126
- Instructor: MURRAY, JANIECE
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $150.00
- Seats Available: 1
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Students provide some of their own materials; find the list online. Special fee is for shared classroom materials. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class.
LLCFT 375 - 001 Pysanky: Ukrainian Easter Eggs
Due to extensive material purchasing, the deadline for dropping this course and receiving your special fee refund is February 21st. This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Special fee is for all required materials. Please wear an apron or art clothes.
LLCFT 375 - 001 Pysanky: Ukrainian Easter Eggs
- Class Number: 19128
- Instructor: POULSON, RYNNA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $145.00
- Seats Available: 0
Due to extensive material purchasing, the deadline for dropping this course and receiving your special fee refund is February 21st. This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Special fee is for all required materials. Please wear an apron or art clothes.
LLCFT 379 - 001 Kintsugi: The Japanese Art
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Special fee is for all needed materials. Students should bring an apron, some newspaper, container to transport the finished product, and choice of gloves. Students are welcome but not required to bring a facial mask and broken plates, cups, or bowls to work on if they have extra time.
LLCFT 379 - 001 Kintsugi: The Japanese Art
- Class Number: 19120
- Instructor: SADLER, HARUKO
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $104.00
- Seats Available: 0
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Special fee is for all needed materials. Students should bring an apron, some newspaper, container to transport the finished product, and choice of gloves. Students are welcome but not required to bring a facial mask and broken plates, cups, or bowls to work on if they have extra time.
LLCFT 379 - 002 Kintsugi: The Japanese Art
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Special fee is for all needed materials. Students should bring an apron, some newspaper, container to transport the finished product, and choice of gloves. Students are welcome but not required to bring a facial mask and broken plates, cups, or bowls to work on if they have extra time.
LLCFT 379 - 002 Kintsugi: The Japanese Art
- Class Number: 19121
- Instructor: SADLER, HARUKO
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $104.00
- Seats Available: 0
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Special fee is for all needed materials. Students should bring an apron, some newspaper, container to transport the finished product, and choice of gloves. Students are welcome but not required to bring a facial mask and broken plates, cups, or bowls to work on if they have extra time.
LLCFT 380 - 001 Guitar-Building Workshop
Taught by Matheson Harris. **MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.** Due to extensive material purchasing, the deadline for dropping this course and recieving your special fee refund is Feb 20th. Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Special fee is for all needed equipment and shop rental. Please wear comfortable, long-sleeved shirts and long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable.
LLCFT 380 - 001 Guitar-Building Workshop
- Class Number: 19755
- Instructor: HARRIS, MATHESON
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $529.00
- Seats Available: 0
Taught by Matheson Harris. **MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.** Due to extensive material purchasing, the deadline for dropping this course and recieving your special fee refund is Feb 20th. Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Special fee is for all needed equipment and shop rental. Please wear comfortable, long-sleeved shirts and long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable.
LLCFT 383 - 001 Wheel-Thrown Ceramics
Class meets at Workshop SLC (153 2100 S, South Salt Lake). Special fee is for studio rental and all needed materials.
LLCFT 383 - 001 Wheel-Thrown Ceramics
LLCFT 385 - 001 Lapidary:Cutting and Polishing
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and supplies.
LLCFT 385 - 001 Lapidary:Cutting and Polishing
- Class Number: 19122
- Instructor: HARRIS-SMITH, JAN
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $149.00
- Seats Available: 0
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and supplies.
LLCFT 385 - 002 Lapidary:Cutting and Polishing
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and supplies.
LLCFT 385 - 002 Lapidary:Cutting and Polishing
- Class Number: 19123
- Instructor: HARRIS-SMITH, JAN
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $149.00
- Seats Available: 0
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and supplies.
LLCFT 387 - 001 Beginning Sewing II: Basic
**MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.** Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Students provide their own sewing machine and most of their own supplies; find the list online. Special fee is for shared supplies and studio rental. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. **LLCFT 267 Beginning Sewing I is an excellent precursor to this class.
LLCFT 387 - 001 Beginning Sewing II: Basic
- Class Number: 19118
- Instructor: MCCAUSLAND, ANDREA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $205.00
- Seats Available: 1
**MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.** Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Students provide their own sewing machine and most of their own supplies; find the list online. Special fee is for shared supplies and studio rental. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. **LLCFT 267 Beginning Sewing I is an excellent precursor to this class.
LLCFT 388 - 001 Hand-Embroidered Jewelry
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Special fee is for the shared materials. Students are responsible for their own embroidery needles and precision scissors.
LLCFT 388 - 001 Hand-Embroidered Jewelry
- Class Number: 19113
- Instructor: ROCKS, ALLYSON
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $100.00
- Seats Available: 3
This class takes place in person at the University Connected Learning and Continuing Education building (540 Arapeen Drive, SLC). Special fee is for the shared materials. Students are responsible for their own embroidery needles and precision scissors.
LLCFT 390 - 001 Jewelry Make and Take: Ring
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and supplies.
LLCFT 390 - 001 Jewelry Make and Take: Ring
- Class Number: 19115
- Instructor: SCHMIDT, AMY
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $109.00
- Seats Available: 0
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and supplies.
LLCFT 391 - 001 Jewelry Make and Take: Cuff
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and supplies.
LLCFT 391 - 001 Jewelry Make and Take: Cuff
- Class Number: 19116
- Instructor: SCHMIDT, AMY
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $139.00
- Seats Available: 0
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and supplies.
LLCFT 392 - 001 Thanks, It Has Pockets!
**MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.** Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Students provide their own sewing machine and most of their own supplies; find the list online. Special fee is for shared tools and studio rental. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. **LLCFT 267 Beginning Sewing I is an excellent precursor to this class.
LLCFT 392 - 001 Thanks, It Has Pockets!
- Class Number: 19119
- Instructor: MCCAUSLAND, ANDREA
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $94.00
- Seats Available: 5
**MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll.** Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Students provide their own sewing machine and most of their own supplies; find the list online. Special fee is for shared tools and studio rental. We hate canceling classes, but sometimes there are forces outside of our control. Please keep this in mind as you purchase supplies and hang onto your receipts. Email our office at lifelong@continue.utah.edu to inquire about the status of a class. **LLCFT 267 Beginning Sewing I is an excellent precursor to this class.
LLCFT 393 - 001 Jewelry Make and Take: Pendant
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and supplies.
LLCFT 393 - 001 Jewelry Make and Take: Pendant
- Class Number: 19124
- Instructor: HARRIS-SMITH, JAN
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $119.00
- Seats Available: 0
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and supplies.
LLCFT 394 - 001 Jewelry Make and Take: Earring
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and supplies.
LLCFT 394 - 001 Jewelry Make and Take: Earring
- Class Number: 19125
- Instructor: HARRIS-SMITH, JAN
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $104.00
- Seats Available: 0
Class meets at Salt City Smithery (3450 S Main St, Unit 44W, South Salt Lake). Special fee is for tool rental and supplies.
LLCFT 395 - 001 Beginning Woodworking II
**Prerequisite LLCFT 359 Beginning Woodworking** MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll. Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Special fee is for all needed equipment and shop rental. Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable.
LLCFT 395 - 001 Beginning Woodworking II
- Class Number: 19127
- Instructor: HARMAN, JONATHAN
- Component: Lecture
- Type: In Person
- Units: 0.0
- Wait List: No
- Fees: $359.00
- Seats Available: 1
**Prerequisite LLCFT 359 Beginning Woodworking** MAKE members receive a 10% tuition discount. If you are a MAKE Salt Lake member, please call us at (801) 587-5433 to enroll. Class takes place at MAKE Salt Lake (663 W 100 S, SLC). Special fee is for all needed equipment and shop rental. Please wear long pants combined with a closed toe work boot or shoe. Please do not wear loose articles of clothing or jewelry that can easily become entangled in a power tool. A shop apron, safety glasses, and hearing protection are advisable.