Departmental Advisors
Undergraduate Studies Office
Debra Mascaro
MEB 2220
Graduate Studies Office
Donald Bloswick
MEB 2266
Departmental Notes

For course descriptions and pre-requisite information click on the subject column next to the appropriate catalog number.

THIS DEPARTMENT ENFORCES UNDERGRADUATE PREREQUISITES. Please note that the registration system does not factor in transfer work when determining if prerequisites have been met. If you are unable to register for a course and think you have met the prerequisite(s), please contact an advisor from this department to inquire about obtaining a permission code. You may be administratively dropped from a course if the prerequisite has not been met.

ME EN 1005 - 001 CAD Lab

ME EN 1005 - 001 CAD Lab

  • Class Number: 14699
  • Instructor: HOWELL, ADAM
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: -2

ME EN 1010 - 001 Intro Robot Sys Des II


Sections 2-8 belong to this lecture.This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.

ME EN 1010 - 001 Intro Robot Sys Des II


Sections 2-8 belong to this lecture.This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section.

ME EN 1010 - 002 Intro Robot Sys Des II

ME EN 1010 - 002 Intro Robot Sys Des II

ME EN 1010 - 003 Intro Robot Sys Des II

ME EN 1010 - 003 Intro Robot Sys Des II

ME EN 1010 - 004 Intro Robot Sys Des II

ME EN 1010 - 004 Intro Robot Sys Des II

ME EN 1010 - 005 Intro Robot Sys Des II

ME EN 1010 - 005 Intro Robot Sys Des II

ME EN 1010 - 006 Intro Robot Sys Des II

ME EN 1010 - 006 Intro Robot Sys Des II

ME EN 1010 - 007 Intro Robot Sys Des II

ME EN 1010 - 007 Intro Robot Sys Des II

ME EN 1010 - 008 Intro Robot Sys Des II

ME EN 1010 - 008 Intro Robot Sys Des II

ME EN 1300 - 001 Statics/Strength

ME EN 1300 - 001 Statics/Strength

  • Class Number: 1131
  • Instructor: COATS, BRITTANY
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 27

ME EN 2020 - 001 Particle Dynamics


This class meets with ME EN 2080-001 in WEB 2250.

ME EN 2020 - 001 Particle Dynamics

  • Class Number: 1909
  • Instructor: DEVRIES, LARRY
  • Component: Lecture
  • Type: In Person
  • Units: 2.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 0

This class meets with ME EN 2080-001 in WEB 2250.

ME EN 2080 - 001 Dynamics


This class meets with ME EN 2020-001.

ME EN 2080 - 001 Dynamics

  • Class Number: 1132
  • Instructor: DEVRIES, LARRY
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 2

This class meets with ME EN 2020-001.

ME EN 2510 - 001 Intro Energy Sys Des II


Sections 2 - 7 belong to this lecture. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section. Sections 002 -008 belong to this lecture.

ME EN 2510 - 001 Intro Energy Sys Des II

  • Class Number:
  • Instructor: ROEMER, ROBERT
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 28

Sections 2 - 7 belong to this lecture. This course requires registration for a lab and/or discussion section. Students will be automatically registered for this lecture section when registering for the pertinent lab and/or discussion section. Sections 002 -008 belong to this lecture.

ME EN 2510 - 002 Intro Energy Sys Des II

ME EN 2510 - 002 Intro Energy Sys Des II

  • Class Number: 16200
  • Instructor: ROEMER, ROBERT
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 0

ME EN 2510 - 003 Intro Energy Sys Des II

ME EN 2510 - 003 Intro Energy Sys Des II

  • Class Number: 16201
  • Instructor: ROEMER, ROBERT
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 15

ME EN 2510 - 004 Intro Energy Sys Des II

ME EN 2510 - 004 Intro Energy Sys Des II

  • Class Number: 16202
  • Instructor: ROEMER, ROBERT
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Seats Available: -2

ME EN 2510 - 005 Intro Energy Sys Des II

ME EN 2510 - 005 Intro Energy Sys Des II

  • Class Number: 16203
  • Instructor: ROEMER, ROBERT
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 6

ME EN 2510 - 006 Intro Energy Sys Des II

ME EN 2510 - 006 Intro Energy Sys Des II

  • Class Number: 16204
  • Instructor: ROEMER, ROBERT
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Seats Available: -6

ME EN 2510 - 007 Intro Energy Sys Des II

ME EN 2510 - 007 Intro Energy Sys Des II

  • Class Number: 16205
  • Instructor: ROEMER, ROBERT
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 5

ME EN 2655 - 001 Manufacturing Lab

ME EN 2655 - 001 Manufacturing Lab

  • Class Number: 5988
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 6

ME EN 2655 - 002 Manufacturing Lab

ME EN 2655 - 002 Manufacturing Lab

  • Class Number: 10951
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 6

ME EN 2655 - 003 Manufacturing Lab

ME EN 2655 - 003 Manufacturing Lab

  • Class Number: 15612
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 6

ME EN 2655 - 004 Manufacturing Lab

ME EN 2655 - 004 Manufacturing Lab

  • Class Number: 10952
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 3

ME EN 2655 - 005 Manufacturing Lab

ME EN 2655 - 005 Manufacturing Lab

  • Class Number: 10953
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 6

ME EN 2655 - 006 Manufacturing Lab

ME EN 2655 - 006 Manufacturing Lab

  • Class Number: 10954
  • Instructor: KNUTSON, MICHAEL P
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $80.00
  • Seats Available: 6

ME EN 3210 - 001 Mechatronics II


Sections 2 - 13 belong to this lecture. This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 3210 - 001 Mechatronics II

  • Class Number:
  • Instructor: ABBOTT, JAKE
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 4

Sections 2 - 13 belong to this lecture. This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 3210 - 002 Mechatronics II

ME EN 3210 - 002 Mechatronics II

  • Class Number: 2909
  • Instructor: ABBOTT, JAKE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: -3

ME EN 3210 - 003 Mechatronics II

ME EN 3210 - 003 Mechatronics II

  • Class Number: 2910
  • Instructor: ABBOTT, JAKE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 0

ME EN 3210 - 004 Mechatronics II

ME EN 3210 - 004 Mechatronics II

  • Class Number: 2911
  • Instructor: ABBOTT, JAKE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 1

ME EN 3210 - 005 Mechatronics II

ME EN 3210 - 005 Mechatronics II

  • Class Number: 2912
  • Instructor: ABBOTT, JAKE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 1

ME EN 3210 - 006 Mechatronics II

ME EN 3210 - 006 Mechatronics II

  • Class Number: 2913
  • Instructor: ABBOTT, JAKE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: -2

ME EN 3210 - 007 Mechatronics II

ME EN 3210 - 007 Mechatronics II

  • Class Number: 2914
  • Instructor: ABBOTT, JAKE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: -1

ME EN 3210 - 008 Mechatronics II

ME EN 3210 - 008 Mechatronics II

  • Class Number: 2915
  • Instructor: ABBOTT, JAKE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: -1

ME EN 3210 - 009 Mechatronics II

ME EN 3210 - 009 Mechatronics II

  • Class Number: 4775
  • Instructor: ABBOTT, JAKE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 0

ME EN 3210 - 010 Mechatronics II

ME EN 3210 - 010 Mechatronics II

  • Class Number: 5734
  • Instructor: ABBOTT, JAKE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: -2

ME EN 3210 - 011 Mechatronics II

ME EN 3210 - 011 Mechatronics II

  • Class Number: 14181
  • Instructor: ABBOTT, JAKE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 11

ME EN 3210 - 012 Mechatronics II

ME EN 3210 - 012 Mechatronics II

  • Class Number: 12389
  • Instructor: ABBOTT, JAKE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: -1

ME EN 3210 - 013 Mechatronics II

ME EN 3210 - 013 Mechatronics II

  • Class Number: 12390
  • Instructor: ABBOTT, JAKE
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $100.00
  • Seats Available: 1

ME EN 3300 - 001 Strength Of Materials


Sections 2 - 6 belong to this lecture. This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 3300 - 001 Strength Of Materials

  • Class Number:
  • Instructor: DEVRIES, LARRY
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 24

Sections 2 - 6 belong to this lecture. This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 3300 - 002 Strength Of Materials

ME EN 3300 - 002 Strength Of Materials

  • Class Number: 1484
  • Instructor: DEVRIES, LARRY
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: -9

ME EN 3300 - 003 Strength Of Materials

ME EN 3300 - 003 Strength Of Materials

  • Class Number: 1485
  • Instructor: DEVRIES, LARRY
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: -9

ME EN 3300 - 004 Strength Of Materials

ME EN 3300 - 004 Strength Of Materials

  • Class Number: 1486
  • Instructor: DEVRIES, LARRY
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: -23

ME EN 3300 - 005 Strength Of Materials

ME EN 3300 - 005 Strength Of Materials

  • Class Number: 1487
  • Instructor: DEVRIES, LARRY
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: 13

ME EN 3300 - 006 Strength Of Materials

ME EN 3300 - 006 Strength Of Materials

  • Class Number: 5127
  • Instructor: DEVRIES, LARRY
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $50.00
  • Seats Available: -7

ME EN 3650 - 001 Heat Transfer


Sections 2 - 12 belong to this lecture. This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 3650 - 001 Heat Transfer

  • Class Number:
  • Instructor: UDELL, KENT S
  • Component: Lecture
  • Type: In Person
  • Units: 4.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 5

Sections 2 - 12 belong to this lecture. This course requires registration for a lab section. Students will be automatically registered for this lecture section when registering for the pertinent lab section.

ME EN 3650 - 002 Heat Transfer

ME EN 3650 - 002 Heat Transfer

  • Class Number: 5128
  • Instructor: UDELL, KENT S
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: -11

ME EN 3650 - 003 Heat Transfer

ME EN 3650 - 003 Heat Transfer

  • Class Number: 1586
  • Instructor: UDELL, KENT S
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: -9

ME EN 3650 - 004 Heat Transfer

ME EN 3650 - 004 Heat Transfer

  • Class Number: 1587
  • Instructor: UDELL, KENT S
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: -1

ME EN 3650 - 005 Heat Transfer

ME EN 3650 - 005 Heat Transfer

  • Class Number: 1588
  • Instructor: UDELL, KENT S
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: -9

ME EN 3650 - 006 Heat Transfer

ME EN 3650 - 006 Heat Transfer

  • Class Number: 1589
  • Instructor: UDELL, KENT S
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: -2

ME EN 3650 - 007 Heat Transfer

ME EN 3650 - 007 Heat Transfer

  • Class Number: 4776
  • Instructor: UDELL, KENT S
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: -7

ME EN 3650 - 008 Heat Transfer

ME EN 3650 - 008 Heat Transfer

  • Class Number: 5129
  • Instructor: UDELL, KENT S
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: -4

ME EN 3650 - 009 Heat Transfer

ME EN 3650 - 009 Heat Transfer

  • Class Number: 5130
  • Instructor: UDELL, KENT S
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: -2

ME EN 3650 - 010 Heat Transfer

ME EN 3650 - 010 Heat Transfer

  • Class Number: 5131
  • Instructor: UDELL, KENT S
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: -1

ME EN 3650 - 011 Heat Transfer

ME EN 3650 - 011 Heat Transfer

  • Class Number: 5132
  • Instructor: UDELL, KENT S
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: -8

ME EN 3650 - 012 Heat Transfer

ME EN 3650 - 012 Heat Transfer

  • Class Number: 13808
  • Instructor: UDELL, KENT S
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Fees: $35.00
  • Seats Available: 9

ME EN 3910 - 001 Design Methodology

ME EN 3910 - 001 Design Methodology

  • Class Number: 2916
  • Instructor: RAEYMAEKERS, BART
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: -3

ME EN 4010 - 001 Engineering Design II

ME EN 4010 - 001 Engineering Design II

  • Class Number: 2917
  • Instructor: GALE, BRUCE
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $81.00
  • Seats Available: 7

ME EN 4050 - 001 Concurrent Eng. II

ME EN 4050 - 001 Concurrent Eng. II

  • Class Number: 2922
  • Instructor: CLARK, PAUL
  • Component: Lecture
  • Type: In Person
  • Units: 2.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: -2

ME EN 4999 - 001 Honors Thesis/Project

ME EN 4999 - 001 Honors Thesis/Project

  • Class Number: 1610
  • Instructor: CHEN, KUAN
  • Component: Honors Thesis Project
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 10

ME EN 5030 - 001 Reliability Engr

ME EN 5030 - 001 Reliability Engr

  • Class Number: 15613
  • Instructor: BLINN, MICHAEL P
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 4

ME EN 5050 - 001 Micromachining

ME EN 5050 - 001 Micromachining

ME EN 5060 - 001 Sustain Product/Process


The pre-requisites for this class are listed wrong in the course catalog. The actual pre-requisite is Upper Division status. Please complete a permission code request form at http://mech.utah.edu/forms/prereq/prereg.php if you have Upper Division status and would like to take this class.

ME EN 5060 - 001 Sustain Product/Process

  • Class Number: 16426
  • Instructor: BALAJI, A.K.
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 11

The pre-requisites for this class are listed wrong in the course catalog. The actual pre-requisite is Upper Division status. Please complete a permission code request form at http://mech.utah.edu/forms/prereq/prereg.php if you have Upper Division status and would like to take this class.

ME EN 5210 - 001 State Space Control

ME EN 5210 - 001 State Space Control

  • Class Number: 5989
  • Instructor: MEEK, SANFORD
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 19
  • Class Number: 15628
  • Instructor: MASCARO, STEPHEN A
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 8

ME EN 5400 - 001 Vibrations

ME EN 5400 - 001 Vibrations

  • Class Number: 2918
  • Instructor: MINOR, MARK ANDREW
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 8

ME EN 5520 - 001 Composite Mat'ls

ME EN 5520 - 001 Composite Mat'ls

  • Class Number: 2919
  • Instructor: ADAMS, DANIEL
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 53

ME EN 5530 - 001 Continuum Mechanics

ME EN 5530 - 001 Continuum Mechanics

  • Class Number: 15662
  • Instructor: BRANNON, REBECCA M
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 7

ME EN 5810 - 001 Thermal Sys Des

ME EN 5810 - 001 Thermal Sys Des

  • Class Number: 15665
  • Instructor: DILLON, M
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 12

ME EN 5820 - 001 HVAC

  • Class Number: 15667
  • Instructor: GWILLIAM, SCOTT
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 14

ME EN 5830 - 001 Aero Propulsion

ME EN 5830 - 001 Aero Propulsion

  • Class Number: 15627
  • Instructor: CHEN, KUAN
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 29

Enrollment in this course requires the approval of Dr. Mascaro (dmascaro@mech.utah.edu).

ME EN 5910 - 079 Co-Op

  • Class Number: 1444
  • Instructor: MASCARO, DEBRA J
  • Component: Clinical
  • Type: In Person
  • Units: 1.0 - 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 10

Enrollment in this course requires the approval of Dr. Mascaro (dmascaro@mech.utah.edu).

ME EN 5920 - 001 Design Project


Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5920 - 001 Design Project

  • Class Number: 3770
  • Instructor: ROEMER, ROBERT
  • Component: Special Projects
  • Type: In Person
  • Units: 1.0 - 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5930 - 001 Undergrad Thesis


Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5930 - 001 Undergrad Thesis

  • Class Number: 1614
  • Instructor: AMEEL, TIM
  • Component: Independent Study
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 25

Each faculty member is assigned a unique section of ME EN 5930. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5950 - 001 Indep Study


Each faculty member is assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5950 - 001 Indep Study

  • Class Number: 3642
  • Instructor: AMEEL, TIM
  • Component: Independent Study
  • Type: In Person
  • Units: 1.0 - 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 10

Each faculty member is assigned a unique section of ME EN 5950. Complete a Course Participation Request form (available in MEB 2220) and return it to the ME Undergraduate Advising Office (MEB 2220) to receive approval and the withheld class number for the appropriate section. You will then register by adding a class by class number.

ME EN 5960 - 003 Integrated Building Technology

ME EN 5960 - 003 Integrated Building Technology

ME EN 5960 - 004 Advanced Manufacturing


Please contact the instructor to be placed on the registration list.

ME EN 5960 - 004 Advanced Manufacturing

  • Class Number: 9124
  • Instructor: SLOWIK, TOM S
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Please contact the instructor to be placed on the registration list.

ME EN 5960 - 005 Advanced Manufacturing


Please contact the instructor to be placed on the registration list.

ME EN 5960 - 005 Advanced Manufacturing

  • Class Number: 12547
  • Instructor: SLOWIK, TOM S
  • Component: Laboratory
  • Type: In Person
  • Units: --
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Please contact the instructor to be placed on the registration list.

ME EN 6030 - 001 Reliability Engr

ME EN 6030 - 001 Reliability Engr

  • Class Number: 15614
  • Instructor: BLINN, MICHAEL P
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 2

ME EN 6050 - 001 Micromachining

ME EN 6050 - 001 Micromachining

ME EN 6060 - 001 Sustain Product/Process

ME EN 6060 - 001 Sustain Product/Process

  • Class Number: 16427
  • Instructor: BALAJI, A.K.
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 24

ME EN 6140 - 001 Occupat Health & Safety


This class meets in the Rocky Mountain Center Occupational Health.

ME EN 6140 - 001 Occupat Health & Safety

  • Class Number: 16433
  • Instructor: MERRYWEATHER, ANDREW
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 2

This class meets in the Rocky Mountain Center Occupational Health.

ME EN 6210 - 001 State Space Control

ME EN 6210 - 001 State Space Control

  • Class Number: 5990
  • Instructor: MEEK, SANFORD
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $40.00
  • Seats Available: 9
  • Class Number: 15629
  • Instructor: MASCARO, STEPHEN A
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 4

ME EN 6400 - 001 Vibrations

ME EN 6400 - 001 Vibrations

  • Class Number: 2920
  • Instructor: MINOR, MARK ANDREW
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 11

ME EN 6520 - 001 Composite Mat'ls

ME EN 6520 - 001 Composite Mat'ls

  • Class Number: 2921
  • Instructor: ADAMS, DANIEL
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 20

ME EN 6530 - 001 Continuum Mechanics

ME EN 6530 - 001 Continuum Mechanics

  • Class Number: 15663
  • Instructor: BRANNON, REBECCA M
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 6

ME EN 6810 - 001 Thermal Sys Des

ME EN 6810 - 001 Thermal Sys Des

  • Class Number: 15666
  • Instructor: DILLON, M
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

ME EN 6820 - 001 HVAC

  • Class Number: 15668
  • Instructor: GWILLIAM, SCOTT
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 9

ME EN 6830 - 001 Aero Propulsion

ME EN 6830 - 001 Aero Propulsion

  • Class Number: 15993
  • Instructor: CHEN, KUAN
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 9

ME EN 6950 - 001 Indep Study


Each faculty member is assigned a unique section of ME EN 6950. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 6950 - 001 Indep Study

  • Class Number: 1615
  • Instructor: AMEEL, TIM
  • Component: Independent Study
  • Type: In Person
  • Units: 1.0 - 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 75

Each faculty member is assigned a unique section of ME EN 6950. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 6955 - 001 Special Project


Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 6955 - 001 Special Project

  • Class Number: 1616
  • Instructor: AMEEL, TIM
  • Component: Special Projects
  • Type: In Person
  • Units: 1.0 - 4.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 75

Each faculty member is assigned a unique section of ME EN 6955. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 6960 - 001 Com Tech Info: Princ. & Tech.


An organizational meeting will be held in MEB 2109 at noon on the first Wednesday of classes, or contact Dr. Roemer for information (801-585-5631, bob.roemer@utah.edu).

ME EN 6960 - 001 Com Tech Info: Princ. & Tech.

  • Class Number: 9963
  • Instructor: ROEMER, ROBERT
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 20

An organizational meeting will be held in MEB 2109 at noon on the first Wednesday of classes, or contact Dr. Roemer for information (801-585-5631, bob.roemer@utah.edu).

ME EN 6960 - 004 Advanced Manufacturing

ME EN 6960 - 004 Advanced Manufacturing

  • Class Number: 13540
  • Instructor: SLOWIK, TOM S
  • Component: Lecture
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 5

ME EN 6960 - 005 Advanced Manufacturing

ME EN 6960 - 005 Advanced Manufacturing

  • Class Number: 13541
  • Instructor: SLOWIK, TOM S
  • Component: Lecture
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 5

ME EN 6960 - 006 Heterogeneous Microsystems Tec


Project-based course in microsystems: Students choose either a microfab-based design/build project, or design MEMS devices for submission to Sandia University Alliance competition. Art students welcome to collaborate designing Kinetic Micro Sculpture.

ME EN 6960 - 006 Heterogeneous Microsystems Tec

  • Class Number: 9185
  • Instructor: BAKER, BRIAN
  • Instructor: HARVEY, IAN
  • Component: Lecture
  • Type: In Person
  • Units: 1.0 - 4.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 7

Project-based course in microsystems: Students choose either a microfab-based design/build project, or design MEMS devices for submission to Sandia University Alliance competition. Art students welcome to collaborate designing Kinetic Micro Sculpture.

ME EN 6960 - 007 Environmental Instrumentation


Please contact Dr. Eric Pardyjak (pardyjak@eng.utah.edu) by 12-1-2010 if you are interested in taking this class.

ME EN 6960 - 007 Environmental Instrumentation

  • Class Number: 13777
  • Instructor: HOREL, JOHN
  • Instructor: PARDYJAK, ERIC
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 6

Please contact Dr. Eric Pardyjak (pardyjak@eng.utah.edu) by 12-1-2010 if you are interested in taking this class.

ME EN 6960 - 008 Micro Acuators


Students taking this class must enroll in one of these lab sections as well: ME EN 6960-009, ME EN 6960-010. ME EN 6960-011 or ME EN 6960-012.

ME EN 6960 - 008 Micro Acuators

  • Class Number: 13776
  • Instructor: BRAMHANAND, ARHATHA
  • Instructor: KIM, HANSEUP
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 3

Students taking this class must enroll in one of these lab sections as well: ME EN 6960-009, ME EN 6960-010. ME EN 6960-011 or ME EN 6960-012.

ME EN 6960 - 009 Micro Acuators


Students registering for this class must also register for ME EN 6960-008 or ME EN 7960-005.

ME EN 6960 - 009 Micro Acuators

  • Class Number: 13779
  • Instructor: KIM, HANSEUP
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 0

Students registering for this class must also register for ME EN 6960-008 or ME EN 7960-005.

ME EN 6960 - 010 Micro Acuators


Students registering for this class must also register for ME EN 6960-008 or ME EN 7960-005.

ME EN 6960 - 010 Micro Acuators

  • Class Number: 6011
  • Instructor: KIM, HANSEUP
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 0

Students registering for this class must also register for ME EN 6960-008 or ME EN 7960-005.

ME EN 6960 - 011 Micro Acuators


Students registering for this class must also register for ME EN 6960-008 or ME EN 7960-005.

ME EN 6960 - 011 Micro Acuators

  • Class Number: 17494
  • Instructor: KIM, HANSEUP
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 0

Students registering for this class must also register for ME EN 6960-008 or ME EN 7960-005.

ME EN 6960 - 012 Micro Acuators


Students registering for this class must also register for ME EN 6960-008 or ME EN 7960-005.

ME EN 6960 - 012 Micro Acuators

  • Class Number: 17495
  • Instructor: KIM, HANSEUP
  • Component: Laboratory
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 2

Students registering for this class must also register for ME EN 6960-008 or ME EN 7960-005.

ME EN 6960 - 013 Systems Eng. II

ME EN 6960 - 013 Systems Eng. II

  • Class Number: 12539
  • Instructor: GOLDBERG, BENJAMIN E
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 2

ME EN 6975 - 001 Masters Thesis


Each faculty member is assigned a unique section of ME EN 6975. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 6975 - 001 Masters Thesis

  • Class Number: 1617
  • Instructor: AMEEL, TIM
  • Component: Thesis Research
  • Type: In Person
  • Units: 1.0 - 12.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 10

Each faculty member is assigned a unique section of ME EN 6975. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 6980 - 001 Fac Consult, MS


Each faculty member is assigned a unique section of ME EN 6980. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 6980 - 001 Fac Consult, MS

  • Class Number: 1618
  • Instructor: AMEEL, TIM
  • Component: Independent Study
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 10

Each faculty member is assigned a unique section of ME EN 6980. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 7110 - 001 System Safety

ME EN 7110 - 001 System Safety

  • Class Number: 15669
  • Instructor: BLOSWICK, DONALD
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 2

ME EN 7120 - 002 Functional Anatomy


To be added to the waitlist, please send an email to sjm.bamberg@utah.edu with your name, unid, department, degree program (BS, MS, PhD) and an email address for us to contact you at registration time.

ME EN 7120 - 002 Functional Anatomy

  • Class Number: 11767
  • Instructor: BAMBERG, STACY M
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $250.00
  • Seats Available: -6

To be added to the waitlist, please send an email to sjm.bamberg@utah.edu with your name, unid, department, degree program (BS, MS, PhD) and an email address for us to contact you at registration time.

ME EN 7210 - 001 Optimal Controls

ME EN 7210 - 001 Optimal Controls

  • Class Number: 15671
  • Instructor: MEEK, SANFORD
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Fees: $20.00
  • Seats Available: 10

ME EN 7530 - 001 Fracture

ME EN 7530 - 001 Fracture

  • Class Number: 15670
  • Instructor: THOMSEN, MARK
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: -4

ME EN 7660 - 001 Adv Convection

ME EN 7660 - 001 Adv Convection

  • Class Number: 15664
  • Instructor: CHEN, KUAN
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 12

ME EN 7710 - 001 Env Fluid Dynamics

ME EN 7710 - 001 Env Fluid Dynamics

  • Class Number: 16772
  • Instructor: PARDYJAK, ERIC
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 2

ME EN 7960 - 001 Comm Tech Info: Princ. & Tech.


Contact ME EN department for location and time. 801-585-5631.

ME EN 7960 - 001 Comm Tech Info: Princ. & Tech.

  • Class Number: 5785
  • Instructor: ROEMER, ROBERT
  • Component: Special Topics
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 20

Contact ME EN department for location and time. 801-585-5631.

ME EN 7960 - 002 Grad Fluids Seminar


This is a seminar class.

ME EN 7960 - 002 Grad Fluids Seminar

  • Class Number: 8706
  • Instructor: DILLON, M
  • Component: Special Topics
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 10

This is a seminar class.
  • Class Number: 12309
  • Instructor: HOLLERBACH, JOHN
  • Component: Special Topics
  • Type: In Person
  • Units: 1.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 5

ME EN 7960 - 004 Mech Machining Surfaces

ME EN 7960 - 004 Mech Machining Surfaces

  • Class Number: 10938
  • Instructor: BALAJI, A.K.
  • Component: Special Topics
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 6

ME EN 7960 - 005 Micro Acuators


Students taking this class must enroll in one of these lab sections as well: ME EN 6960-009, ME EN 6960-010. ME EN 6960-011 or ME EN 6960-012.

ME EN 7960 - 005 Micro Acuators

  • Class Number: 10939
  • Instructor: BRAMHANAND, ARHATHA
  • Instructor: KIM, HANSEUP
  • Component: Lecture
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 1

Students taking this class must enroll in one of these lab sections as well: ME EN 6960-009, ME EN 6960-010. ME EN 6960-011 or ME EN 6960-012.

ME EN 7960 - 007 Haptics

ME EN 7960 - 007 Haptics

  • Class Number: 15672
  • Instructor: PROVANCHER, WILLIAM
  • Component: Special Topics
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: -10

ME EN 7960 - 008 Large-Eddy Sim Turbulent Flows

ME EN 7960 - 008 Large-Eddy Sim Turbulent Flows

  • Class Number: 15673
  • Instructor: STOLL, Rob
  • Component: Special Topics
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 0

ME EN 7970 - 001 PhD Dissertation


Each faculty member is assigned a unique section of ME EN 7970. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 7970 - 001 PhD Dissertation

  • Class Number: 1619
  • Instructor: AMEEL, TIM
  • Component: Thesis Research
  • Type: In Person
  • Units: 1.0 - 12.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 10

Each faculty member is assigned a unique section of ME EN 7970. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 7980 - 001 Fac Consultation, PhD


Each faculty member is assigned a unique section of ME EN 7980. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 7980 - 001 Fac Consultation, PhD

  • Class Number: 1620
  • Instructor: AMEEL, TIM
  • Component: Independent Study
  • Type: In Person
  • Units: 3.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 10

Each faculty member is assigned a unique section of ME EN 7980. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 7990 - 001 Cont Registration, PhD


Each faculty member is assigned a unique section of ME EN 7990. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.

ME EN 7990 - 001 Cont Registration, PhD

  • Class Number: 1621
  • Instructor: AMEEL, TIM
  • Component: Continuing Registration
  • Type: In Person
  • Units: 0.0
  • Requisites: Yes
  • Wait List: No
  • Seats Available: 74

Each faculty member is assigned a unique section of ME EN 7990. Please see your faculty advisor for the withheld class number for his/her section. You will then register by adding a class by class number.